533773

Zoom MRS-1044 Manual

13
Zoom out
Zoom in
Previous page
1/152
Next page
Side panel
This slot is for installation of a separately sold SCSI board or USB board (planned for release).
which a mic or line-level device can be connected.
• GUITAR/BASS:
This is a phone jack to which a passive-
type electric guitar or bass can be connected directly.
These jacks are given priority in the order of GUITAR/BASS
→ UNBALANCE → BALANCE. For example, if all three are
connected, the GUITAR/BASS jack will be selected.
(2)[INPUT 2] jacks
These are the input jacks for INPUT 2. When connecting a
stereo output device, use these jacks in conjunction with
the [INPUT 1] jacks. Select and use one of the following
two jacks.
• BALANCE:
This is an XLR balanced jack to which a mic
or line-level device can be connected.
• UNBALANCE:
This is an unbalanced phone jack to
which a mic or line-level device can be connected.
If both jacks are connected, the UNBALANCE jack will be
selected.
(3)[OUTPUT] jacks
These jacks output the signal that has passed through the
MASTER fader. The following three jacks can be used
simultaneously.
• MASTER:
These are RCA phono analog output jacks.
• PHONES:
A pair of stereo headphones can be connected
to this jack. Use the knob beside this jack to adjust the
headphone volume.
• DIGITAL:
This is an optical-type digital output jack.
(4)[EXP PEDAL] jack
A separately sold expression pedal (ZOOM FP01, FP02)
can be connected to this jack.
(5)[FOOT SW] jack
A separately sold foot switch (ZOOM FS01) can be
connected to this jack.
(6)[MIDI IN] connector
MIDI messages can be input from this connector.
(7)[MIDI OUT] connector
MIDI messages can be output from this connector.
(8)[PHANTOM ON/OFF] switch
When this switch is on, +48V phantom power will be
supplied to the two [INPUT 1/2] BALANCE jacks.
If devices that do not require phantom power are
connected to the [INPUT 1/2] BALANCE jacks, you must
turn this switch off.
(9)[POWER] switch
This switch turns the power of the MRS-1044 on/off.
When turning off the power of the MRS-1044, you must use
the [POWER] switch. If you turn the power off by simply
disconnecting the AC adaptor plug, the previously recorded
content or changes will be lost.
(10)
[DC 12V] jack
Connect the included AC adaptor to this jack.
NOTE
NOTE
NOTE
NOTE
ZOOM MRS-1044
13
Parts of the MRS-1044 and what they do
Rear panel
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom MRS-1044 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom MRS-1044 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom MRS-1044

Zoom MRS-1044 User Manual - German - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info