666214
15
Zoom out
Zoom in
Previous page
1/97
Next page
15
Names and functions of parts
1
POWER switch
This turns the
on and off.
Switch to — to turn the power on. Switch to
to turn the power off.
When the POWER switch setting is changed to
OFF, the current mixer settings are automatically
saved in the unit and in the settings file in the
project folder on the SD card.
2
DC IN 12V AC adapter connector
Connect the included AC adapter here.
3
USB HOST port
This USB 2.0 HOST port is for connecting USB
ash drives.
Projects and audio files can be saved on and
loaded from connected USB ash drives.
4
MODE switch
Set whether to use as a USB HOST, card reader
or audio interface.
This cannot be changed after starting up.
5
USB DEVICE port
This USB 2.0 port is for connecting with a com-
puter.
It will start up as a card reader or audio interface,
depending on the MODE switch selection.
Card reader mode
Operating as an SD card reader, data can be ex-
changed with a computer.
Audio interface mode
Operating as an audio interface, audio data can
be exchanged with a computer.
Inputs: The signals from channels 1–12 after they
pass through their compressors and the master
fader output signals are input to the computer.
Outputs: Outputs from the computer can be as-
signed to channels 9/10 and 11/12.
Use when connected to an iOS device is possi-
ble if the CLASS COMPLIANT MODE switch is
set to ON.
6
CLASS COMPLIANT MODE switch
Use this to turn Class Compliant Mode ON/OFF.
Set it to ON when connected to an iOS device.
7
SAMPLE RATE switch
Set the sampling rate used by the unit.
This cannot be changed after starting up.
8
SD card slot
This slot is for SD cards.
The
supports SD, SDHC and SDXC card
specications.
You can test whether an SD card can be used with
the
. (
P.83)
HINT
9
CONTROL IN jack
A footswitch (ZOOM FS01) can be connected
here.
The footswitch can be assigned to one function:
starting/stopping recorder playback, manually
punching in/out or muting/unmuting the built-in
effect. (
P.86)
Rear panel
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom L-12 LiveTrak at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom L-12 LiveTrak in the language / languages: English as an attachment in your email.

The manual is 47,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info