533764
80
Zoom out
Zoom in
Previous page
1/100
Next page
Miscellaneous Settings
ZOOM H4
80
2.
Press and hold the center of the
[MENU] key until the indication “Key
Hold” appears on the display.
The key-hold function is enabled and all control
operations will be disregarded, except for the
[POWER] switch, [MIC GAIN] switch, [INPUT
1 GAIN] switch, [INPUT 2 GAIN] switch,
[PHONES LEVEL] and the center of the
[MENU] key.
When a disabled control is operated, the
indication shown below appears on the display
for 2 seconds.
3.
To disable the key-hold function,
press and hold the center of the
[MENU] key.
The display returns to the original condition.
Using the USB function
By connecting the [USB] port of the H4 to a
computer, the H4 can be used as an audio
interface with built-in effects. (Effects can only
be used when the sampling rate is 44.1 kHz.) It
is also possible to use the H4 as a card reader, to
access an SD card inserted in the H4 from the
computer.
Using the H4 as audio interface for
a computer
This section explains how to use the H4 as an
audio interface for a computer.
The operating environment requirements for use
of the H4 as an audio interface are as follows.
Compatible operating system
• Windows XP
• MacOS X (10.2 or later)
Bit rate
16-bit
Sampling rate
44.1 kHz/48 kHz, selectable
When the H4 has been recognized by the
computer as an audio interface, the input signal
of the H4 can be processed by the effect section
and then recorded as audio tracks using a DAW
(Digital Audio Workstation) software application
on the computer. The playback signal of the
DAW software application can be obtained at the
[LINE OUTPUT] jack and [PHONES] jacks of
the H4.
Regardless of the record/playback condition of
the DAW software application, the input signal
can always be monitored at the H4.
For information on recording and playback steps
of the DAW software application, refer to the
documentation of the software.
NOTE
If the DAW software application has an echo
back function (input signal during recording is
supplied directly to an output), this must be
disabled when using the H4. If recording is
carried out with this function enabled, the
output signal will sound as if processed by a
flanger or delay effect.
•Effects can only be used when the sampling
rate is 44.1 kHz.
1.
Connect the [USB] port of the H4 to
the computer, using a USB cable.
2.
Verify that the recorder is stopped.
Then press the center of the [MENU]
H4_E.book 80 ページ 2006年9月1日 金曜日 午後7時56分
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom H4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom H4 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom H4

Zoom H4 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info