533764
23
Zoom out
Zoom in
Previous page
1/100
Next page
Quick Guide 2
4-track mode basic operation
ZOOM H4
23
the [MIC GAIN] switch to set the sensitivity to a
suitable level. (For information on recommended
settings, see page 13.)
When recording via the [INPUT 1]/[INPUT 2]
jacks, use the [INPUT 1 GAIN] switch or
[INPUT 2 GAIN] switch to set the sensitivity to a
suitable level. For information on recommended
settings, see the table below.
[INPUT 1 GAIN]/[INPUT 2 GAIN] switch
setting
NOTE
Note that the signal input to the H4 will be
distorted if the input sensitivity is not set correctly.
2.
At the 4-track mode top screen,
press the bottom of the [MENU] key.
The INPUT menu for making various input
related settings appears.
3.
Move the jog dial up/down to bring
the cursor to “LEVEL”. Then press
the jog dial.
The screen for adjusting the recording level
appears.
HINT
The alphanumeric indication at the left of the
signal level bars shows the input source (“1”
and “2” for the [INPUT 1]/[INPUT 2] jacks and
“L” and “R” for the built-in stereo mic).
While this screen is being shown, the input
signal can be monitored via the [LINE OUTPUT]
jack/[PHONES] jack.
4.
If two input sources (IN1&2) have
been selected, move the jog dial up/
down to bring the cursor to the input
source for which to adjust the
recording level.
5.
Press the jog dial to bring up the
fader icon on the meter display.
The recording level can now be adjusted. While
the fader icon is shown, the cursor is not
displayed.
6.
Adjust the recording level by moving
the jog dial up/down while sound is
being produced.
The recording level setting can be checked at the
top right. To record with optimum sound quality,
the input signal level should be set as high as
possible, without exceeding the 0 (dB) indication
on the meter. The setting range is 0 – 127. When
Setting
Application
L
For use when an electric guitar or other
line-output device is connected directly.
Also used for on-mic recording with a
condenser mic or other high-output mic
connected to the balanced input (XLR).
M
For on-mic recording of vocals or
instruments from a close range
H
For off-mic recording with a greater
distance to instruments or for recording
an instrument with a low volume level.
Recording level for input
source selected by cursor
Input signal level
A
lphanumeric
indication of input source
Fader icon
H4_E.book 23 ページ 2006年9月1日 金曜日 午後7時56分
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom H4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom H4 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom H4

Zoom H4 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info