533764
17
Zoom out
Zoom in
Previous page
1/100
Next page
Quick Guide 1
Stereo mode basic operation
ZOOM H4
17
HINT
To check the action of the effect, press the [REC]
key to set the H4 to the recording standby
condition, and then monitor the signal at the [LINE
OUTPUT] or [PHONES] jack while the instruments
to record are being played.
4.
To accept the settings for the COMP/
LIMIT module, press the jog dial.
5.
Bring the cursor to the “MIC MODEL”
item and press the jog dial.
If the built-in stereo mic is selected as input
source, the MIC MODEL module is available in
addition to the COMP/LIMIT module. This
module simulates the characteristics of various
well-known microphone models.
6.
Move the jog dial up/down to change
the MIC MODEL module settings.
The following microphone simulation settings
are available.
OFF (default)
The MIC MODEL module is off.
SM57, MD421, U87, C414
The MIC MODEL module is enabled, and the
respective mic characteristics are simulated.
For details on mic characteristics, see page
95.
7.
To accept the settings for the MIC
MODEL module, press the jog dial.
8.
To return to the stereo mode top
screen, press the center of the
[MENU] key.
HINT
In stereo mode, you only need to select an
effect type. There is no provision for adjusting
detailed parameters.
For details about the effects available in stereo
mode, see the reference section at the end of
this manual.
If you have switched effects on or off or
changed effect settings, the recording level will
have to be readjusted.
Manufacturer names and product names
mentioned in this documentation are
trademarks or registered trademarks of their
respective owners. The names are used only to
illustrate sonic characteristics and do not
indicate any affiliation with ZOOM
CORPORATION.
Recording
To record in stereo mode, proceed as follows.
1.
At the stereo mode top screen, use
the TRACK [1] – [4] keys to select the
recording format (
p. 13).
2.
Press the [REC] key.
The [REC] key flashes, and the recorder is now
in the standby condition.
The level meter on the display lets you check the
input signal level (recording level). You can also
monitor the input signal via the [LINE
OUTPUT] jack/[PHONES] jack.
HINT
If the monitor function (
p. 36) is on, the signal
can always be monitored via the [LINE
OUTPUT] jack/[PHONES] jack, even if the unit
is not in recording standby mode.
If the auto gain function is on, the input signal
level will be detected when you set the H4 to
H4_E.book 17 ページ 2006年9月1日 金曜日 午後7時56分
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom H4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom H4 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom H4

Zoom H4 User Manual - German - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info