533758
89
Zoom out
Zoom in
Previous page
1/94
Next page
ZOOM H2
89
Error Messages
Card related messages Cause Remedy
No Card
No SD card is inserted. Insert SD card and turn power on.
No File
A valid file was not found.
Card Format Error!
SD card formatting process failed, or card
was not recognized normally.
*
Card Full!
Card became full during recording
File name exists!
File name change was attempted, but file
with same name already exists.
Specify a different file name.
Stop Recorder!
User attempted to access a menu not
available during playback or recording.
Stop the recorder operation first.
Card Protected
The SD card is write-protected.
Change setting of card's write-
protect switch.
Format Card?
SD card with incorrect format was inserted.
When you select "YES" at this
screen and then press the
5
(REC)
key, all data are erased and
initialization is carried out.
Now Recording!
User attempted to access a menu not
available during recording or recording
standby.
Stop recording first.
File Create Error!
The file could not be created at start of
recording.
*
Card Error!
A card error has occurred.
File Protected
User attempted to write to a read-only file
from the file menu.
Change the read-only file attribute
using a computer.
File Rename Error!
A blank or invalid file name was specified
during file name editing.
Do not use invalid characters.
Card Write Error
Shown when an error occurs during file
write other than recording.
*
Card Read Error!
Shown when an error occurs when opening a
file.
Data Write Error
Shown when data transfer to SD card cannot
keep up with data stream during recording.
Reduce sampling frequency and/or
number of bits.
* If card related error messages occur frequently, the SD card may be defective.
Other messages Cause Remedy
RESET DATE/TIME
The internal clock was reset because battery
backup was interrupted.
Set the date and time again. The
internal clock requires batteries to be
inserted.
Low Battery!
Battery voltage is low. Replace batteries.
Please Power Off
Shutdown procedure is complete. Set power switch to OFF.
Please pull out external input
When external mic or component is
connected, mic pattern cannot be selected.
Disconnect any external mic or
component connected to [EXT MIC
IN] or [LINE IN] jack.
Only Built-in MIC is active
External mic or component is connected,
although only built-in mic is active in 4-
channel mode.
Invalid File!
An invalid file was specified.
Select a valid file.
H2-E.fm 89 ページ 2007年7月11日 水曜日 午後3時19分
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom H2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom H2 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zoom H2

Zoom H2 User Manual - German - 94 pages

Zoom H2 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info