629753

Zoom G2.1u Manual

17
Zoom out
Zoom in
Previous page
1/23
Next page
Effect Types and Parameters
ZOOM G2.1u
32
tE
TAPE ECHO
This effect simulates a tape echo.
TIME
1 – 99,
1.0 – 2.0
FEEDBACK
0 – 98, 1.0
MIX
0 – 98, 1.0
Adjusts the delay time. In the range
from 10 – 990 ms, the adjustment is
made in 10-ms steps (1 – 99). For 1
second and above, the adjustment is
made in 100-ms steps (1.0 – 2.0).
Adjusts the feedback amount.
Adjusts the level of the effect
sound mixed to the original
sound.
dd
DYNAMIC DELAY
This is a dynamic delay where the effect volume changes depending on the input signal level. With positive
settings, the effect volume increases at higher input signal levels. With negative settings, the effect volume
increases at lower input signal levels.
TIME
1 – 99,
1.0 – 2.0
AMOUNT
0 – 10
SENSE
-10 – -1, 1 – 10
Adjusts the delay time. In the range
from 10 – 990 ms, the adjustment is
made in 10-ms steps (1 – 99). For 1
second and above, the adjustment is
made in 100-ms steps (1.0 – 2.0).
Adjusts the level of the effect
sound mixed to the original sound
Adjusts the effect sensitivity.
dF
DYNAMIC FLANGER
This is a dynamic flanger where the effect volume changes depending on the input signal level. With positive
settings, the effect volume increases at higher input signal levels. With negative settings, the effect volume
increases at lower input signal levels.
DEPTH
0 – 98, 1.0
RATE
0 – 50
SENSE
-10 – -1, 1 – 10
Adjusts the modulation depth.
Adjusts the modulation rate.
Adjusts the effect sensitivity.
MP
MONO PITCH SHIFTER
This is a monophonic pitch shifter with low sound modulation, suitable for single-note playing.
SHIFT
-12 – -1, dt,
1 – 12, 24
TONE
0 – 10
MIX
0 – 98, 1.0
Adjusts the pitch shift amount in
semitones. Selecting "dt" gives a
detuning effect.
Adjusts the sound quality.
Adjusts the level of the effect sound
mixed to the original sound.
HP
HARMONIZED PITCH SHIFTER
This is an intelligent pitch shifter that automatically generates harmonies according to a preset key and
scale.
SCALE
-6, -5, -4, -3,
-m, m, 3, 4, 5, 6
KEY
C, Co, d...b
MIX
0 – 98, 1.0
Determines the interval for the pitch
shifted sound (see Table 2).
Determines the tonic for the scale used
for pitch shifting (see Table 3).
Adjusts the level of the effect sound
mixed to the original sound.
Table 2 Table 3
Setting Type of scale Interval Setting Type of scale Interval Setting Tonic Setting Tonic
-6
Major scale
Sixth down
3
Major scale
Third up
C
C
Fo
F#
-5
Fifth down
4
Fourth up
Co
C#
G
G
-4
Fourth down
5
Fifth up
d
D
Go
G#
-3
Third down
6
Sixth up
do
D#
A
A
-m
Minor scale
Third down
E
E
Ao
A#
m
Third up
F
F
b
B
TAP
TAP
TAP
TE
DD
DF
MP
HP
Effect Types and Parameters
ZOOM G2.1u
33
DELAY
DELAY module
This is a delay module which allows long delay times and use of the hold function.
dL
DELAY
This is a delay with a maximum setting of 5000 ms.
Pd
PINGPONG DELAY
This is a ping-pong type delay where the delay sound alternates between left and right.
EC
ECHO
This is a warm sounding long delay of up to 5000 ms duration.
These three effect types have the same parameters.
TIME
1 – 99,
1.0 – 5.0
FEEDBACK
0 – 98, 1.0
MIX
0 – 98, 1.0
Adjusts the delay time. In the
range from 10 – 990 ms, the
adjustment is made in 10-ms
steps (1 – 99). For 1 second and
above, the adjustment is made in
100-ms steps (1.0 – 5.0).
Adjusts the feedback amount.
Adjusts the level of the effect
sound mixed to the original
sound.
REVERB
REVERB module
This module comprises various reverb functions such as hall reverb, early reflection, and
multi-tap delay.
HL
HALL
This reverb simulates the acoustics of a concert hall.
rM
ROOM
This reverb simulates the acoustics of a room.
SP
SPRING
This effect simulates a spring-type reverb.
The above three effect types have the same parameters.
DECAY
1 – 30
TONE
0 – 10
MIX
0 – 98, 1.0
Adjusts the duration of the reverb. Adjusts the sound quality.
Adjusts the level of the effect sound
mixed to the original sound.
Er
EARLY REFLECTION
This effect isolates only the early reflection components of the reverb.
DECAY
1 – 30
SHAPE
±10
MIX
0 – 98, 1.0
Adjusts the duration of the reverb.
Adjusts the envelope of the effect sound.
In the negative range, the envelope is
reversed. At 0, the effect is a gate reverb.
In the positive range, the envelope is a
decay-type envelope.
Adjusts the mixing ratio of
original sound and effect sound.
Md
MULTI TAP DELAY
This effect produces several delay components with different delay times.
TIME
1 – 99,
1.0 – 3.0
PATTERN
1 – 8
MIX
0 – 98, 1.0
Adjusts the delay time. In the
range from 10 – 990 ms, the
adjustment is made in 10-ms
steps (1 – 99). For 1 second and
above, the adjustment is made in
100-ms steps (1.0 – 3.0).
Selects the combination pattern for the
taps. The selection ranges from
rhythmical to random patterns.
Adjusts the mixing ratio of
original sound and effect
sound.
HOLD
HOLD
HOLD
TAP
TAP
DL
PD
EC
HL
RM
SP
ER
MD
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom G2.1u at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom G2.1u in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info