666181
12
Zoom out
Zoom in
Previous page
1/34
Next page
Thank you very much for purchasing the ZOOM .
Please read this manual carefully to learn about all the functions of the
so that you
will be able to use it fully for a long time.
Keep this manual in a convenient place for reference when necessary.
OPERATION MANUAL
© 2013 ZOOM CORPORATION
Copying or reproduction of this document in whole or in part without permission is prohibited.
Contents
Usage and Safety Precautions ..................................2
Introduction ..............................................................3
Part Names ...............................................................4
Turning the Power ON ..............................................6
Display Information ...................................................7
Terms Used in This Manual .......................................7
Using Patches ...........................................................8
Adjusting Effects.....................................................10
Adjusting the Master Level and Tempo...................14
Saving and Swapping Patches ................................15
Changing Various Settings ......................................16
Using the Tuner .......................................................20
Using Rhythms .......................................................22
Using the Looper ....................................................24
Using the Expression Pedal (
only) ........26
Updating the Firmware ...........................................28
Troubleshooting ......................................................30
Specifications .........................................................31
2
Usage and Safety Precautions
SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and cautions
that you must read to prevent accidents. The meanings of these
symbols are as follows:
Warning
Something that could cause serious injury or death.
Caution
Something that could cause injury or damage to the
equipment.
Other symbols
Required (mandatory) actions.
Prohibited actions.
Warning
Operation using an AC adapter
Use only a ZOOM AD-16 AC adapter with this unit.
Do not use do anything that could exceed the ratings of outlets and other
electrical wiring equipment. Before using the equipment in a foreign country
or other region where the electrical voltage differs from that indicated on
the AC adapter, always consult with a shop that carries ZOOM products
beforehand and use the appropriate AC adapter.
Operation using batteries
Use 4 conventional 1.5-volt AA batteries (alkaline or nickel-metal hydride).
Read battery warning labels carefully.
Always close the battery compartment cover when using the unit.
Alterations
Never open the case or attempt to modify the product.
Caution
Product handling
Do not drop, bump or apply excessive force to the unit.
Be careful not to allow foreign objects or liquids to enter the unit.
Operating environment
Do not use in extremely high or low temperatures.
Do not use near heaters, stoves and other heat sources.
Do not use in very high humidity or near splashing water.
Do not use in places with excessive vibrations.
Do not use in places with excessive dust or sand.
AC adapter handling
When disconnecting the AC adapter from an outlet, always pull the body of
the adapter itself.
During lightning storms or when not using the unit for a long time,
disconnect the power plug from the AC outlet.
Battery handling
Install the batteries with the correct +/- orientation.
Use a specified battery type. Do not mix new and old batteries or different
brands or types at the same time. When not using the unit for an extended
period of time, remove the batteries from the unit.
If a battery leak should occur, wipe the battery compartment and the battery
terminals carefully to remove all battery residue.
Connecting cables with input and output jacks
Always turn the power OFF for all equipment before connecting any cables.
Always disconnect all connection cables and the AC adapter before moving
the unit.
Volume
Do not use the product at a loud volume for a long time.
Usage Precautions
Interference with other electrical equipment
In consideration of safety, the
has been designed to
minimize the emission of electromagnetic radiation from the device and to
minimize external electromagnetic interference. However, equipment that
is very susceptible to interference or that emits powerful electromagnetic
waves could result in interference if placed nearby. If this occurs, place the
and the other device farther apart. With any type of
electronic device that uses digital control, including the
,
electromagnetic interference could cause malfunction, corrupt or destroy data
and result in other unexpected trouble. Always use caution.
Cleaning
Use a soft cloth to clean the panels of the unit if they become dirty. If
necessary, use a damp cloth that has been wrung out well. Never use abrasive
cleansers, wax or solvents, including alcohol, benzene and paint thinner.
Malfunction
If the unit becomes broken or malfunctions, immediately disconnect the AC
adapter, turn the power OFF and disconnect other cables. Contact the store
where you bought the unit or ZOOM service with the following information:
product model, serial number and specific symptoms of failure or malfunction,
along with your name, address and telephone number.
Copyrights
t"MM USBEFNBSLT QSPEVDU OBNFT BOE DPNQBOZ OBNFT NFOUJPOFE JO UIJT
documentation are the property of their respective owners.
Note: All trademarks and registered trademarks mentioned in this manual are
for identification purposes only and are not intended to infringe on the
copyrights of their respective owners.
3
Introduction
Five simultaneous effects
You can select and arrange the order of up to five effects as you like and use them simultaneously. Use the
cursor keys and view the effects being used on the LCD anytime.
Variety of rhythm patterns
Realistic sounds are provided with updated rhythm patterns and tones.
Looper
The looper can be synchronized with rhythms and record phrases of up to 30 seconds.
Realistic amplifier modeling
With realistic amplifier modeling sounds from our , we have faithfully re-created the rich harmonics and
compression feel of tube amps.
Long battery operation time
20 hours of continuous operation is possible using alkaline batteries (when the LCD backlight is off).
* A printed list of effect parameters is not included with the .
Please download a copy from the ZOOM website.
ĺ
http://www.zoom.co.jp/
4
Part Names
O Top Panel
RHYTHM/LOOPER key
MENU key
Display
HOME key
Parameter knob
ENTER key
Foot switches
Cursor keys (up, down, left, right)
Expression pedal
( only)
5
Rear Panel O
Guitar amplifier
Headphones
Portable audio
player, etc.
ZOOM AC
adapter (AD-16)
Computer
Guitar
INPUT jack
Pedal switch
( only)
OUTPUT jackAUX IN jack
USB
connector
DC9V
AC adapter jack
NOTE
Signals input through t
the AUX IN jack are
sent directly to the
OUTPUT jack without
passing through the
built-in effects.
6
Turning the Power ON
Lower the amplifier's volume all the way.
When using batteries O
Insert batteries into the battery compartment.
Plug a guitar cable into the INPUT jack.
(Doing so turns the unit on.)
When using an adapter O
Connect an AD-16 adapter.
Turn the amplifier's power on and raise its
volume.
NOTE
USB bus power operation is possible.t
eco mode
If the eco mode setting is ON and it is left unused for
10 hours, it turns off automatically. (See page 16.)
7
Display Information
HOME Screen O
Bank name Patch number
Patch names
Status icon (
ĺ
P18)
Add effects (
ĺ
P12)
Reorder effects (
ĺ
P13)
Delete effects (
ĺ
P12)
Remaining power display
Patch settings (
ĺ
P9)
Effect
This shows that the patch
contents have been changed.
This shows that the patch
contents have been saved.
HINT
Press t to return to the HOME screen from any other screen.
Effects that are OFF appear gray.t
Terms Used in This Manual
Patch
The ON/OFF status and the parameter settings of each effect are stored as "patches".
Use patches to recall and save effects. The
can store 100 patches.
Bank
A set of 10 patches is called a "bank".
The
has 10 banks labeled A–J.
9
To change settings for individual
patches
Turn on the HOME
screen.
Select PATCH SETTINGS.
Press .
The PATCH SETTINGS
screen appears.
Press .
The patch editing screen
appears.
Turn .
Open the page you want.
only
To adjust the patch level (LVL) O
Turn .
Select LEVEL.
Press .
Turn
.
Set between 0 and 120.
To change the patch name O
(NAME)
Turn .
Move the cursor.
Press .
Confirm the character to change.
Turn .
Change the character.
HINT
Yo u c a n u s e t and to change the type of
character/symbol.
10
Adjusting Effects
To select an effect
Turn on the HOME
screen.
Select the effect.
Press .
Show the top screen of the
selected effect.
HINT
The virtual knobs are shown with the current t
parameter values.
To turn an effect ON or OFF
Press or .
Effect OFFEffect ON
Virtual knob
Graphic for selected effect
To select an effect type
Use and .
Effect processing capacity M
The allows
you to combine five effects
as you like. However, if you
combine effect types that
require great amounts of
processing power (amp models, for example),
the available processing capacity might not be
enough. If this occurs, "PROCESSING LIMIT"
will appear, and the effect will be bypassed.
You can avoid this by changing some of the
effect types.
12
Adjusting Effects
To add an effect
Turn on the HOME
screen.
Select ADD EFFECT.
Press .
Open the category
selection screen.
Turn .
Select the category.
Press .
Open the added effect
placement screen.
Turn .
Select where to add the
effect.
Press .
Add the effect.
Turn to end.
Select EXIT.
Press .
HINT
On the effect screen, you can also press and t
hold or to add an effect.
To remove an effect
Turn on the HOME
screen.
Select DELETE EFFECT.
Press .
Open the effect deletion
screen.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom G1Xon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom G1Xon in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info