629759
20
Zoom out
Zoom in
Previous page
1/37
Next page
ZOOM B2.1u
20
Other Functions
This section describes how to use the internal expression pedal as well as an external pedal or foot switch.
Use of the B2.1u as an audio interface or direct box is also explained.
Making settings for the
internal expression pedal
The built-in expression pedal on the top panel of
the B2.1u can function as a volume pedal or it can
be used to control an effect parameter in real time.
Which function is selected for the expression
pedal is stored for each patch individually.
For details on parameters that can be modified
with the expression pedal, see pages 27 – 33.
1. Select the patch for which you want
to use the expression pedal.
2. Set the Module selector to the
"CONTROL" position.
The B2.1u goes into edit mode.
3. Turn Parameter knob 1 to select one
of the following modulation targets
for the expression pedal ( p. 34).
oF
Pedal is inactive.
VL
Volume
WU, Wd, WH, WL
WAH/EFX module
bU, bd, bH, bL
ZNR/MIX module
NOTE
When the modulation target is set to the ZNR/MIX
module, the mixing balance between the original
sound and effect sound of the DRIVE/SYNTH module
can be adjusted with the pedal. (If the DRIVE/SYNTH
module is set to OFF, the pedal has no effect. )
MU, Md, MH, ML
MOD/SFX module
dU, dd, dH, dL
DELAY module
rU, rd, rH, rL
REVERB module
HINT
The modulation target can also be selected by
using the [PEDAL ASSIGN] key (
p. 18). This
method is available both in edit mode and in play
mode.
Which parameter changes when the expression pedal
is operated depends on the effect type selected for
the module. For details, see pages 27 – 33.
The pattern in which the parameter changes when the
expression pedal is operated can be selected in edit
mode from four choices. For details, see page 34.
4. If necessary, store the patch.
The expression pedal setting is stored as part of
the patch.
5. Select the patch in play mode and
operate the expression pedal.
The selected function will be activated.
When the B2.1u is in the bypass condition, the
expression pedal always functions as a volume
pedal, regardless of the setting made in step 3.
Adjusting the sensitivity of
the built-in expression pedal
The expression pedal of the B2.1u is adjusted for
optimum operation at the factory, but sometimes,
readjustment may be necessary. If the sound does
not change when the pedal is fully pushed down,
or if it changes excessively even if the pedal is
only lightly pushed, adjust the pedal as follows.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom B2.1u at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom B2.1u in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info