666250
53
Zoom out
Zoom in
Previous page
1/71
Next page
Formatting
a
RAM
Card
Store
Before a new RAM card can be used, it must be
formatted by the
9200.
If
an
unformatted card is inserted
in the card slot and
a
card page menu is selected, the
message "CARD Error" appears on the display.
To format a RAM
card,
proceed as follows.
Insert
the
unformatted card into the card slot and select
the "Card Save" option from the Card page. Following
the "CARD Error" indication, the message "FORMAT
OK?" flashes on the display.
If you press the EXECUTE key in this condition, the card
will be formatted. After the process is finished, the
message "FORMAT Completed" appears and the unit
reverts
to
the "Card Save" page.
Use only the dedicated
RAM-32
cards. Other
RAM
cards
cannot be used. The formatting is not compatible with the
formatting of
RAM
cards in the
ZOOM
9010.
If you want to
use a
RAM
card of the
9010
with the
9200,
you must format
it
once more on the
9200.
This page serves to store the currently selected program
in the user
area
or on a RAM card.
After you press the
FUNCTION
4
key at the Utility
mode main menu, the currently selected program number
flashes, which indicates that this number is being offered
as
the
store target.
When the EXECUTE key is pressed, the following
verification message appears.
When the EXECUTE key is pressed once more, the
selected program is stored at the same program number.
The following indication briefly appears on the display,
and then the unit reverts to the initial Store page.
If
you press the
EXIT
key while the "Sure?" message is
displayed, the Store operation is canceled and the unit
reverts to the previous display.
The functions and operation steps of this page are identical to
the Store page in the Edit Utility mode, except for the position
of the
lit
indicators and the fact that the unit reverts to the
Program mode when the UTILITY key or EXIT
key
is
pressed. For details on the store operation, please refer to
page
37.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9200 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info