666249
6
Zoom out
Zoom in
Previous page
1/48
Next page
Front
Panel
(1
)
INPUT dial
(2)
Input
level indicators
rl
L0
INPUT
0
R
7
OUTPUT1
BALANCE LEVEL
L*>R
(3)
OUTPUT
BALANCE
dial
(4)
OUTPUT
LEVEL
dial
(5)
Program number indicator
(6)
P
rog ramr
1
A
keys
lnput/Output Controls
INPUT dial
For adjusting the level of the input signal. The inside
dial is for adjusting the left
(L)
channel and the outside
is for the right
(R)
channel. (When adjusting
separately, hold one dial in place while turning the
other.)
Input level indicators
For monitoring the level of the input signal. When an
input signal is received, the LED lights up in green and
changes in
color
to
amber
as
the level becomes greater.
When a high level signal capable of causing distortion
is input, the LED at the top lights up in red. (For
best
results, adjust the input level so that the
LED
is usually
in amber.)
OUTPUT
BALANCE dial
For adjusting the overall balance of the sound between
direct and effect. At the DIRECT position, the input
sound is heard without processing. At the
EFFECT
position, only the processed sound is heard. This
setting is applied globally to all effects.
OUTPUT LEVEL dial
For adjusting the overall output level.
Program/Effect Selection Controls
(5)
Program number indicator
Indicates the selected program number
(1
-
99).
(6)
Program
V
/
A
keys
For selecting programs.
(7)
Effect
selector dial
(8)
LCD
display
LCD Display and Editing Controls
LCD
display
Shows various operating information, such as the
parameter values (up to three digits) and other
messages.
Data Entry controls
1,2
and
3
For adjusting parameter values.
Page key
For advancing through the different display "pages" in
the LCD. (The selected page and number of pages
available is indicated at the bottom left of the LCD.)
Compare key
Used in editing a program, this switches back and forth
between the currently edited values and the values of
the original program, allowing comparison of the
sound. When in the Utility mode, this key is used to
select the previous display page.
UTILITY
key
For selecting the functions of the Utility mode (such
as
setting the MIDI channel, transferring
data,
etc.).
EFFECT key
For canceling the effect processing. The LED above
the key lights when the effect is on.
STORE (EXECUTE) key
For storing a program to internal memory. Press the
key twice to store the program to
the
selected program
number. When the LCD prompts you
to
confirm
an
operation with an
"OK?"
message, this key functions
as an EXECUTE key to actually perform the operation.
(7)
Effect
selector dial
For selecting effects. The
LED
indicates the currently
selected effect.
4
Section
I
:
Names and Functions of the Controls and Terminals
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9120 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info