666219
21
Zoom out
Zoom in
Previous page
1/63
Next page
Pre
Dly
(Pre-delay Time):
0
--
125 ms
Determines the time that elapses between the
direct sound and the first of the reflections that
make up the reverb sound.
Input:
0
--
100%
Determines the level of the input signal.
3-ECHO
A
A
natural sounding echo can be produced with the
help of the
Hi
Damp parameter.
Delay: 1
--
490 ms
Determines the time that elapses between the
direct sound and the first delayed repeat, as well
as between each successive repeat.
Feedback:
0
--
99%
Determines the number of delayed repeats of the
sound. Higher values create a greater number of
delayed repeats.
Hi Damp (High Frequency Damping):
0
--
10
Determines the degree of high frequencies in the
delayed repeats or feedback sound. Higher
values make the high frequencies decay faster,
producing a softer delayed sound.
Input: 0
--
100%
Determines the level of the input signal.
4-CHORUS
A
An easy-to-operate chorus program using complex
waveforms for modulation.
Mod Depth (Modulation Depth):
0
--
10O0/0
Determines the intensity of the effect. lncreasing
this value produces stronger modulation.
5-FLANGER
A
Basic flanger program with a wide frequency range.
Mod Frq (Modulation Frequency):
0.05
--
15 Hz
Determines the speed of the modulation effect.
Higher values produce a faster wavering in the
sound.
Mod Depth (Modulation Depth):
0
--
100%
Determines the intensity of the effect. lncreasing
this value produces stronger modulation.
Mod Dly (Modulation Delay):
0.05
--
99.0 ms
Determines the time that elapses between the
direct sound and the onset of the modulation.
Feedback:
-
99
--
0
-
+99
Determines the amount of modulation signal that is
fed back to the effect.
Lower values produce a
subtle chorus effect, while higher values create a
pronounced flanger sound.
Input: 0
--
100%
Determines the level of the input signal.
6-PHASER A
Analog-like warmth in a basic phaser effect.
Mod Frq (Modulation Frequency):
0.05
--
15 Hz
Determines the speed of the modulation effect.
Higher values produce a faster wavering in the
sound.
Mod Depth (Modulation Depth): 0
--
100%
Determines the intensity of the effect. lncreasing
this value produces stronger modulation.
7-PITCH SHIFTER
A
Pitch can be changed over a two octave range in
half-steps.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoom 9010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoom 9010 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info