663406

Zoofari ZTPS 6 A1 - IAN 104092 Manual

11
Zoom out
Zoom in
Previous page
1/72
Next page
Zoofari ZTPS 6 A1
English - 9
Your pet's coat should be thoroughly cleaned before cutting it. You thus prevent the blades
from becoming worn too rapidly due to existing dirt.
The coat to be cut must be clean and dry. Brush through the coat to remove any knots.
First, remove the blade protective cover (2) from the shaving head.
Now attach the desired attachment comb (3, 4, 5, 6) to the shaving head with the teeth
facing upward and press the tab of the attachment comb (3, 4, 5, 6) firmly on the lower
metal side of the shaving head until it engages. Ensure that the attachment comb (3, 4, 5, 6)
has engaged correctly before you start cutting your pet's coat.
If you are not sure which attachment comb (3, 4, 5, 6) you should use, first start with a
large comb and then switch to a smaller comb if necessary.
Insert the mains plug into a socket and move the on/off switch on the side of the pet hair
clippers (1) to the "ON" position to switch on the pet hair clippers (1).
Always switch on the pet hair clippers (1) first before you approach your pet's fur with
the device. This prevents potential blocking of the blades.
To familiarise your pet with the sound of the pet hair clippers (1), approach your pet slowly
with the device when it is switched on.
Cut in the natural direction of growth of your pet's coat. If you cut against the direction of
growth, your pet's hair stands up and is cut shorter as a result.
As a rough indicator for cutting, you should start behind the shoulders and slowly work
backwards and down. Work particularly carefully when you cut/trim sensitive parts of the
body such as face, stomach, legs or hindquarters of your pet.
Start cutting/trimming slowly and carefully.
It is normal that the shaving head heats up while cutting. Switch off the pet hair clippers
(1) at intervals and check whether the cutter may have become too hot for your pet. In
this case, let the pet hair clippers (1) cool down briefly.
When you have finished cutting/trimming or if you want to change an attachment comb (3, 4, 5,
6), move the on/off switch on the side of the pet hair clippers (1) to the "OFF" position to switch off
the pet hair clippers (1) and remove the mains plug from the socket.
Cleaning and care
DANGER! Remove the mains plug from the socket each time you want to clean the pet
grooming set.
DANGER! Never immerse the device in water or other liquids.
Remove the respective attachment comb (3, 4, 5, 6) if attached. You can clean the
attachment combs (3, 4, 5, 6) with water and soap. Then dry these well.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zoofari ZTPS 6 A1 - IAN 104092 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zoofari ZTPS 6 A1 - IAN 104092 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info