Manual Zoef Robot Hendrik-Jan - MR13Z (page 90 of 102) (English, German, Dutch, French)

743029

Zoom out

Zoom in

1/102

After all the fence line is fixed, reserve 10-15cm terminals respectively for both front and tail

ends. Strip the terminals to reveal the copper lines for 2-3cm (Fig. A). Remove the nuts, fasten

the copper lines on copper conductors. Then tighten the nuts (Fig.B). Front tail connect with the red

pole, rear tail connect with the black pole. When the charger is connected to the charging station

and the fence line starts to operate, the red lamp should be off.

Fig. A Fig. B Fig. C

Note: Do not fold or repeat wiring with the rest fence line. Cut it instead (Fig. C)

Mowing He

The mowing height can be adjusted by changing the blades or adjust its position. There are

3 mowing heights using 2 different kinds blades. Detach the blade with a spanner and attach it

again into the desired position.

Note : Make sure that the power key and fuse are not inserted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zoef Robot Hendrik-Jan - MR13Z in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zoef Robot Hendrik-Jan - MR13Z Manual

Product: