647251
4
Zoom out
Zoom in
Previous page
1/16
Next page
Slide the cover off, and connect the SATA power and
data cables from the NVR to the corresponding
ports on your HDD.
Make sure your NVR is unplugged from its power
source, and unscrew the four screws at the cover at
the bottom panel with a Philips screw driver.
Once connected, place the HDD into the NVR with
the cables inside the NVR case, and cover the HDD
with the buffer rubber.
HDMI - Connect to your HDTV or computer monitor with an
HDMI port.
LAN - This is for connection to your home network so you
can connect from the internet.
USB - For connecting your USB mouse to control the
NVR, and also for you to back up the video from the
NVR. If you want to control USB mouse and USB
backup simultaneously at the back of the NVR,
please insert an external USB 2.0 hub with at least 2
ports.
What does this mean?
4
Slide the bottom panel back on. Line up the holes on
the hard drive with the holes on the NVR cover, and
screw the four screws (found in kit) into the holes
using a Philips screwdriver.
When you power on your system and connect the
system to a monitor, you will see a popup on the
monitor asking you to format your HDD. Press [OK]
and wait 5-10 minutes. NOTE: If you do not see this
popup, please manually format your HDD by going
to the Disk Drive Info page.
3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zmodo NVRsystem - ZM-KW0003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zmodo NVRsystem - ZM-KW0003 in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info