713909

Zippie Youngster 3 Manual

11
Zoom out
Zoom in
Previous page
1/112
Next page
ENGLISH
11
YOUNGSTER 3
Übersicht
Folding up (Fig. 3.0).
First remove the seat cushion from the wheelchair and flip up
the (platform) footplate or the individual footplates. Take hold of
the sling from underneath in the middle and pull upwards. The
wheelchair will then fold up. (Fig. 3.0).
Transportation:
To move the mobility aid, the folded wheelchair should be lifted
by holding the front part of the cross-brace and the push
handles.
When transporting the unoccupied wheelchair in a vehicle, it
should be tied down or strapped in.
Unfolding (Fig. 3.1).
Open the strap on folded frame prior to unfolding.
Press down on the seat tubing (see picture). Your wheelchair is
then unfolded. Now snap the seat tubing into position in the
seat saddle. This can be facilitated by slightly tipping your
wheel chair. In this way, the weight can be taken off of one rear
wheel so that the wheelchair can be more easily unfolded.
WARNING!
Be careful not to get your fingers caught in the cross-tube
assembly, (Fig. 3.1).
3.0 Handling
Quick-Release Axles for Rear Wheels
(Fig. 3.2)
The rear wheels are equipped with quick-release axles. The
wheels can thus be installed or removed without using tools. To
remove a wheel, simply depress the quick-release button on the
axle (1) and pull it out, (Fig. 3.2).
CAUTION:
Hold the quick-release button on the axle depressed when
inserting the axle into the frame to mount the rear wheels.
Release the button to lock the wheel in place. The quick-release
button should snap back to its original position.
Setting the Directional Stability (Fig. 3.3)
Release the Allen screws (1) on the underside of the fork. You
can then undo the screw (2). You can now turn the black socket
(3) left or right.
Left – chair pulls to the left
Right – chair pulls to the right
Then tighten up the screw (2) again. Please set a 90° angle
from the fork to the floor.
Now tighten up the screw (1) again. (Fig. 3.3) Use.
Fig. 3.1
Fig. 3.0
Fig. 3.2
Fig. 3.3
2
3
1
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zippie Youngster 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zippie Youngster 3 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info