631594
6
Zoom out
Zoom in
Previous page
1/19
Next page
Attention:
1. There is no positive or negative for the power line of the doorbell.
2. The Doorbell can only connect to low voltage power from 12~24VAC or 12VDC / 0.5A.
3. Please use insulation tape to keep the power line safely connected.
4. Connect the Power Line:
1. If you are using a doorbell chime with power supply via low voltage transformer, you can use
the current cables of the transformer to connect the power line directly to the cables. It
supports 12~24VAC.
2. If you are not using a doorbell chime, you can use the DC connector which is in the package
and a 12VDC Power adapter (not included) to provide power. Refer to the picture below.
Note: You have to buy the 12VDC adapter separately, normally amperage greater than 0.5A is ok.
2.4 Power On
After the power line is connected, the device will power on. The doorbell button ring will turn on
blue and the IR LED will light on if the environment is dark.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zilink Cobell Wi-Fi Doorbell at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zilink Cobell Wi-Fi Doorbell in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info