Manual Zibro SRE835E (page 9 of 15) (English)

564104

Zoom out

Zoom in

1/15

G: The required tem-

perature on the left, the

measured temperature

on the right.

H: The TIMER indicator

light indicates that the

timer function has been

switched on.

E SETTING THE REQUIRED TEMPERATURE

The temperature setting can only be adjusted, when the heater is burning. Use the

adjustment keys ƺ to adjust the temperature. First press either of the two keys to

switch on the function (the °C mark and 4-digit ¹ will start blinking). Next, adjust

the temperature using the key (įmin.) to set the temperature to a higher setting

and the key (Ĭhour) to lower the temperature. Press once to increase the value

one step. After approximately 10 seconds the °C mark and 4-digit will stop blink-

ing and the setting will be locked (Fig. F).

The available temperature settings range from 6°C minimum to 28°C maximum.

When the heater has been unplugged for more than 10 minutes (or after a power

failure), the temperature will reset to the factory setting of 20°C.

F USING THE TIMER

The timer allows you to switch on the heater automatically at a preset time.

In order to switch on the timer, the correct time must have been set (refer to

Section C) and the heater should be off. Follow the procedure below:

Press the button Ƹ and then the TIMER key ƻ immediately after that.

The TIMER light and the information display ¹ will start blinking.

Use the adjustment keys ƺ to set the time at which the heater must ignite.

Use the key (Ĭhour) to set the hours and the key (įmin.) to set the minutes

(interval of 5 minutes).

After approximately 10 seconds the information display will show CLOCK

again and the TIMER indicator light will light up, indicating that the timer

function has been activated (Fig. H).

The timer will ensure that the room will have been heated to approximately

the required temperature at the set time.

When you want to switch off the heater and ignite it again with the timer, all

you have to do is press the TIMER key (refer to Section G).

Press the

button Ƹ once to clear the timer setting.

G SWITCHING OFF THE HEATER

There are two ways to switch off the heater.

Press the button Ƹ. The information display will show the CLOCK

signal. Within approximately one minute the flame will have extinguished.

Press the TIMER key ƻ, when you want to switch off the heater and ignite it

again with the timer the next time. This not only switches off the heater, but

it also activates the timer function. Y

ou can change the required time with the

adjustment keys ƺ (refer to Section F).

p052_061_SRE835E_uk.indd 57 28-06-12 11:22

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zibro SRE835E in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro SRE835E

Zibro SRE835E User Manual - German - 15 pages

Zibro SRE835E User Manual - Dutch - 15 pages

Zibro SRE835E User Manual - French - 17 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zibro SRE835E Manual

Product: