460196
11
Zoom out
Zoom in
Previous page
1/22
Next page
4
111
DRY Operation
1. Push the Mode button to select DRY.
2. Push the
or button ( and ) to set the desired temperature from 21 C to 28 C.
3. Push the
On/off button . The operation lamp lights and the air conditioner starts to operate in the DRY
mode. Push the
On/off button again to stop this unit operation.
TIMER Operation
Push Timer on/off button ( and ) to set the on and off times of the unit. The effective operation time
set by the remote controller for the timer function is limited to a period of between 0.5 and less than 24
hours.
1. To set the STARTING time.
1.1
Push the Timer on button , then the remote controller display shows ON TIMER, the last set time for
the starting operation and the signal "
Hr" will be shown on the Timer display area. You are now ready
to reset the time to START the operation.
1.2
Push the Timer on button again to set desired unit start time.
1.3
After setting the Timer on ,there will be half a second delay before the remote controller transmits the
signal to the air conditioner.
2. To set the STOPPING time.
2.1
Push the Timer off button and the remote controller display will show OFF TIMER and the last set
time for the timer off operation in hours will be shown on the Timer display area. You are now ready
to reset the time of the STOP operation.
2.2
Push the Timer off button again to set the time you want to stop the operation.
2.3
After setting the Timer off, there will be half a second delay before the remote controller transmits
the signal to the air conditioner
.
3. Set the starting & stopping time
3.1
Push the Timer on button , the remote controller display will show ON TIMER, the last set time for
Timer on operation in hours will be shown on the Timer display area. You are now ready to readjust
the
Timer on to start the operation.
3.2
Push the Timer on button again to set the time you want to start the operation.
3.3
Push the Timer of
f
button , the remote controller will show OFF TIMER, the last set time for STOP
operation and the signal "Hr" will be shown on the T
imer display area. Y
ou are now ready to set the
time to STOP operation.
NOTE!
Due to the difference of the set temperature of the unit and the actual indoor temperature, the
Air Conditioner when in DRY mode will automatically operate many times without running the
COOL and FAN mode.
NOTE!
The FAN ONLY mode cannot be used to control the temperature. In this mode, only steps 1, 3 and
4 are applicable.
man_S12xx_uk.qxd 26-01-2007 15:52 Pagina 111
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro S 1246 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro S 1246 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro S 1246

Zibro S 1246 User Manual - German - 22 pages

Zibro S 1246 User Manual - Dutch - 22 pages

Zibro S 1246 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info