134339
10
Zoom out
Zoom in
Previous page
1/22
Next page
Operating the Remote Controller
Install / Replace Batteries
Use two dry alkaline batteries (AAA/LR03).
Do not use rechargeable batteries.
1. Remove the battery cover on the back of the Remote Control by pulling it according to the arrow
direction shown on the cover.
2. Insert new batteries making sure that the (+) and (-) of battery are installed correctly.
3. Reattach the cover by sliding it back into position.
AUTOMATIC Operation
When the Air Conditioner is ready for use, switch on the power and the OPERATION indicator lamp on the
display panel of the indoor unit starts flashing.
1. Use the Mode select button to select AUTO.
2. Push the or button to set the desired room temperature. The most comfortable temperature set-
tings are between 21ºC to 28ºC.
3. Push
the On/off button to start the air conditioner. The OPERATION lamp on the display panel of the
indoor unit lights. The operating mode is AUTO. The F
AN SPEED is automatically controlled.
4. Push the On/off button again to stop the unit operation.
COOL, HEAT, and FAN ONLY Operation
1. If the AUTO mode is not comfortable, you may manually override the settings by using COOL, DRY,
HEAT (HEAT PUMP units only), or FAN ONLY modes by pressing button .
2. Push
the or button ( and ) to set the desired room temperature. When in COOLING mode, the
most comfortable settings are 21ºC or above. When in HEA
TING mode, the most comfortable settings
are 28ºC or below.
3. Push the Fan button to select the FAN mode of AUTO, HIGH, MED or LOW.
4. Push the On/off button . The operation lamp lights and the air conditioner starts to operate per your
settings. Push the On/off button again to stop this unit operation.
NOTE!
In the AUTO mode, the air conditioner can logically choose the mode COOL, FAN, HEAT and
DRY by sensing the difference between the actual ambient room temperature and the set
temperature on the remote controller.
If the AUTO mode is not comfortable for you , the desired mode can be selected manually.
NOTE!
When replacing batteries, do not use old batteries or a different type battery. This may cause
the remote controller to malfunction.
If you do not use the remote controller for several weeks remove the batteries. Otherwise
battery leakage may damage the remote controller.
The average battery life under normal use is about 6 months.
Replace the batteries when there is no answering beep from the indoor unit or if the
Transmission Indicator light fails to appear.
Never mix new and old batteries. Never use different battery types (e.g. alkaline and
manganese dioxide) simultaneously.
4
110
man_S1225_S1233_uk.qxd 07-01-2008 10:44 Pagina 110
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro s 1233 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro s 1233 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro s 1233

Zibro s 1233 Installation Guide - English, German - 98 pages

Zibro s 1233 User Manual - German - 22 pages

Zibro s 1233 Installation Guide - Dutch - 98 pages

Zibro s 1233 User Manual - Dutch - 22 pages

Zibro s 1233 Installation Guide - French - 98 pages

Zibro s 1233 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info