134322
70
Zoom out
Zoom in
Previous page
1/82
Next page
I
solation du tuyau:
a. a. Placer le tube d’évacuation sous la con-
duite.
b. Utilisez du matériau d’isolation de plus de
6 mm d’épaisseur.
-
De tube d’évacuation doit être légère-
ment penché vers le bas côté extérieur
pour évacuer l’eau plus facilement.
Attention, le tube d’évacuation ne soit pas
se vriller, il ne doit pas dépasser et son
extrémité ne doit pas tremper dans l’eau.
Si le tube d’évacuation est prolongé par un tuyau flexible, isoler la partie du tuyau qui passe le long de
l’unité intérieure.
- Si les tuyaux se trouvent du côté droit, le tuyau, le câble électrique et le tube d’évacuation doivent être
isolés et fixés au dos de l’unité intérieure par des serre-tubes.
A. Poser le serre-tube sur l’encoche.
B. Puis appuyez ensuite sur le serre-tube pour le fixer à la plaque de montage.
3
70
Gros tuyau
Câble électrique
P
etit
tuyau
Tube d’évacuation
C
âblage dispositif de dégel
(pompe à chaleur)
Câble électrique
1
(pompe à cha-
l
eur)
Tuyau d’isolation
Plaque de
montage
Serre-tube
Plaque de
montage
Serre-tube
Plaque de
montage
Accrocher
ici
Percer ici
Raccordement des tuyaux
a. Raccordez les tuyaux de l’unité intérieure avec deux clés de ser-
rage. Prenez la résistance de torsion en compte (voir tableau ci-
dessous) pour éviter que le tuyau, les raccords et les écrous ne
se déforment ou se détériorent.
b.
V
isser d’abor
d à la main puis fixer avec les clés de ser
rage.
Bande
Modèle
Dimensions tuyau
Résistance de
torsion
Grosseur écrou
S1126, S1135, S1153 Liquid Side (ø6 or 1/4 inch) 1.8 kg.m 17 mm
S1170 Liquid Side (ø10 or 3/8 inch) 3.5 kg.m 22 mm
S1126 Gas Side (ø10 or 3/8 inch) 3.5 kg.m 22 mm
S1135, S1153 Gas Side (ø12 or 1/2 inch) 5.5 kg.m 24 mm
S1170 Gas Side (ø16 or 5/8 inch) 7.5 kg.m 27 mm
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro s 1153 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro s 1153 in the language / languages: German, Danish, French, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info