Manual Zibro RS 2222 (page 15 of 118) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

728817

Zoom out

Zoom in

1/118

Before igniting the heater, always check the fuel indicator  to see whether the

removable tank needs filling up.

Always ignite the heater with the knurled wick adjustment knob . Never use

matches or a cigarette lighter.

Follow the procedure below:

Turn the knurled wick adjustment knob  clockwise to its stop (Fig. L). If you

apply more pressure you may turn it slightly further; however, it will

automatically return to the start position. When you have set the wick to its

highest position, this action will automatically activate the safety device.

When you have ignited the heater and it shuts off again shortly after, the batteries

need to be replaced. It is best to use new alkaline batteries (4x C-size).

After having ignited the heater, always check whether the combustion

chamber  is level, by sliding it slightly to the left and the right by combustion

chamber handle  (Fig. E). This should be a smooth movement. If the combustion

chamber is not level, this will cause smoke and soot to develop.

D BURNING OF THE HEATER

After you have ignited the heater, it will take 30 minutes before you can check

whether the heater is burning well. Too high a flame may cause smoke and soot,

whereas too low a flame causes smells. (Fig. R).

Burning that is too low may be caused by:

 insufficient fuel (fill the tank)

 poor fuel quality (contact your dealer)

 insufficient ventilation (put window or door ajar)

 wastage of the wick (contact your dealer or replace the wick, refer to section L)

✗

✓

✗

 R

1-3 cm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zibro RS 2222 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 17,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zibro RS 2222 Manual

Product: