Manual Zibro RS 221 (page 12 of 16) (English, German, Dutch, Danish, French, Italian, Spanish)

728811

Zoom out

Zoom in

1/16

1 Open the lid and remove the removable tank.

Remove the batteries from the battery holder .

Open the front grill. Remove the combustion chamber

from the heater. Close the grill.

Pull the knurled wick adjustment knob off the heater.

Unscrew the three cabinet screws on the back and sides

of the heater. Pull the cabinet forward slightly, and

then remove it from the base plate.

Unscrew the four wing nuts from the wick holder.

Lift the wick holder chassis up until the wick is visible.

Place the burner bed next to the heater. (Ensure that

the wiring does not become disconnected).

Remove the screw on the stem holding the bracket and

remove the bracket.

Turn right the stem to the end and remove the wick

sleeve (with wick).

10 Turn the wick sleeve counterclockwise and lift the wick

sleeve up. Remove it from the primary air tube.

Squeeze the wick to loosen the three wick pins and

remove the wick from the wick sleeve. Ensure that you

are wearing gloves and that you have a container in

which to put the old wick.

Replacement of the WicK

L ENSURE THAT THE HEATER IS OFF AND

COMPLETELY COOL BEFORE STARTING TO

REPLACE THE WICK.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zibro RS 221 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 2,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zibro RS 221 Manual

Product: