134324
8
Zoom out
Zoom in
Previous page
1/20
Next page
P729 and PH733 are fitted with the EVS (Effective Ventilation System) as standard.
The second hose must be attached in order to utilise this option. Attach the hose
c
onnectors
ƹ a
nd the hose adapter as described above. Now remove the
protective grill from the air inlet
»: First turn the protective grill
approximately 20-30 degrees (left or right) and then pull it towards you. Connect
the hose connector
ƹ to the air inlet » at the back of the airconditioner. Lead
the hose adapter
Ƽ to the outside (under the hose that is already present) and
s
eal the gap between the window and the frame with the foam components
supplied. Cut these to size if necessary.
If use of the second hose is not possible or desired, then connecting a single hose
to the air outlet
¿ at the back of the airconditioner will suffice for the cooling
mode.
Keep windows and outside doors closed as much as possible in order to
prevent the inflow of exterior air. The air that is intended to enter the room
(specifically during the use of a single hose) in order to allow the
airconditioner to function correctly must always be as cool as possible.
Leading this air through a passage or adjacent room increases the comfort
level.
TIP!
When the device is in use in the cooling mode with two air hoses, it is
prudent to lead the hoses to the outside (e.g. through a window) on the
shadow
side of the building. This will cool the air that is sucked in as
much as possible. In the heating mode, the air hoses can be led out of
the building on the
sunny
side. The expelled air is then as warm as
possible.
8
ATTENTION!
If the device is used with 1 hose, the protective grill must always be
fitted to the air inlet
» at the back of the device.
A
TTENTION!
If the device is used with 2 hoses, it may fall into a different Energy
Efficiency Class. Refer to the technical specifications in this manual.
However, using a second hose as described can have a positive effect on
the energy balance in the room where the device is placed.
22
4
92
22
man_uk_P7xx.qxd 08-11-2006 15:21 Pagina 92
8


Need help? Post your question in this forum.

Forumrules
1

Forum

zibro-ph-733

Reset search

  • My blower fan (A5304330-1) went broken. How can I get a new one? Submitted on 31-1-2023 at 01:08

    Reply Report abuse
  • My blower fan went broken. How can I find a new one? Part Nr.: A5304330-1.














    Submitted on 30-1-2023 at 19:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro ph 733 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro ph 733 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro ph 733

Zibro ph 733 User Manual - German - 21 pages

Zibro ph 733 User Manual - Dutch - 20 pages

Zibro ph 733 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info