4
39
B POSITIONING YOUR AIR CONDITIONER
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
• The air conditioner must stand upright on an even surface.
• Position not (near) bath, shower or other wet or damp area.
• Keep for free air circulation at least 50 cm free from any obstacle or curtains.
• Put the round adapter (10) on the exhaust hose. Connect the hose with the
rectangular end to the air conditioner.
Using the foam
The adapter (11) fits in the opening of the foam (12). Place the foam in the
window and close this as far as possible to refrain the warm air from re-entering
the room.
The window connector
Place the window connector (13) in the hole in the glass (diameter 112 millimetre)
and connect the exhaust hose. Use the cap (14) to close the opening when the air
conditioner is not used.
IMPORTANT
The flexible exhaust hose can be extended from 300 to 1500 mm for mounting.
This length has been designed especially according to the specifications of the air
conditioner. Do not use an extension or exchange for a different hose as that
may lead to malfunctioning. The exhaust air must flow freely, any blockage can
lead to overheating of the air conditioner. Take care to prevent any bow or bend
in the exhaust hose.
WARNING
Before using the air conditioner it should be left in an upright position for at
least 2 hours.