OFF
Programming the timer for OFF - when the unit is running.
P r ess the push button; the 2 left digits of the 4 digits on the LCD display
are flashing.
Press or to adjust the hour.
Press the push button again, the 2 right digits of the 4 digits are flashing.
Press or to adjust the minutes of the clock in intervals of 5 minutes.
The timer is set. After 10 seconds the time display returns.
The circular time scale will be on between the present time to the OFF
p r ogrammed time. The flashing bar on the time scale indicates the real time and
moving a phase every 30 minutes ahead until it reaches the OFF timer time, then
the black segments in the circular time scale will disappear.
Repeat OFF & ON
Programming the timer for repeat OFF & ON - when the unit is running.
P r ess the push button; the 2 left digits of the 4 digits on the LCD display
are flashing.
Press or to adjust the hour.
Press the push button again, the 2 right digits of the 4 digits are flashing.
Press or to adjust the minutes of the clock in intervals of 5 minutes.
The timer is set. After 10 seconds the time display returns.
Repeat the above pro c e d u r e while the digits are still flashing for setting the
ON.
The circular time scale will be on between the 00:00 time to the timer time off ,
and from the time on till 24:00. The flashing bar on the time scale indicates the
real time and moving a phase every 30 minutes ahead. The unit will operate
according to the timer setting daily.
Repeat ON & OFF
Programming the timer for repeat ON & OFF - when the unit is not running.
P r ess the push button; the 2 left digits of the 4 digits on the LCD display
are flashing.
4
66
88:88
8 8:88
88:88
8 8:88
88:88