133754
10
Zoom out
Zoom in
Previous page
1/20
Next page
PLACING BATTERIES IN THE REMOTE CONTROL
Remove the battery cover by pressing the lips in and then pulling the cover
t
oward you. Place the new batteries as indicated (pay attention to the plus- (+)
and minus poles (-). Now replace the battery cover.
Push the plug into the socket.
Press the C/F-button to set °C (Celsius) or °F (Fahrenheit).
The default setting is °C (Celsius).
The following functions can be selected with the mode button on the
remote control.
Automatic regulation of ventilator speed
Cooling;
Dehumidifying;
Circulating;
Heating (PH733).
AUTOMA
TIC
In the automatic mode , the device will cool, dehumidify or heat depending on
the ambient temperature. When the temperature in the room changes, the mode
changes automatically in or
der to maintain the desired temperature as accurately
as possible. The ventilator speed also adjusts automatically. The colour of the
transparent ring around the button on the front of the device
· will change
depending on the mode.
COOLING
When the cooling mode is activated, the transpar
ent ring ar
ound the button on
the fr
ont of the device
· emits a BLUE light.
3
2
ATTENTION!
If the airconditioner does not respond to the remote control, follow the
following procedures:
Ensure that there are batteries in the remote control.
Ensure that the plug of the airconditioner is inserted in the socket
and switched off.
Press the on/off button on the unit until you hear a beep (you will
hear a beep after 8 seconds). After the beep you can release the
button.
Briefly press the on/off button of the remote control.
The remote control is r
eady for use after the beep signal.
1
NOTE!
Use 2 AAA (1.5 Volt) batteries. Do not use rechargeable batteries.
Replace batteries with new batteries of the same type when the display
becomes fuzzy or the signal deteriorates.
4
94
Cooling mode (blue)
man_uk_P7xx.qxd 08-11-2006 15:22 Pagina 94
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro p 726 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro p 726 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro p 726

Zibro p 726 User Manual - German - 21 pages

Zibro p 726 User Manual - Dutch - 20 pages

Zibro p 726 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info