650594
20
Zoom out
Zoom in
Previous page
1/146
Next page
4
8
COPYING THE SETTING FROM ONE DAY TO ANOTHER
Use the copy function if there are multiple days during one week which should
have the same setting times.
Make sure that the heater is not burning. Press the timer key . Use the
adjustment keys N until the day of its source is displayed in the display.
Press extension/day/set to select.
The display shows:
Use the adjustment keys M or N N to choose copy. Press extension/day/set to
select the copy function.
Use the adjustment keys M or N N to select the day to which the settings should
be copied. Press extension/day/set to choose the selected day.
The settings for program for Tuesday are programmed and the display shows
SET for 3 seconds.
After 3 seconds choose another day to copy or end the setting mode by pressing
timer.
OPERATING THE WEEKLY TIMER
Switch on the heater by pressing the POWER button L. And then press the
timer-key immediately after that. The Timer light will light up and the heater
shuts off. The On / Off indicators on the display shows whether the appliance is
switched on or off.
When the appliance is switched off by the timer, the off indicator is visible. The
display shows the -actual time.
When the appliance is switched on by the timer, the on indicator is visible. The
display shows the desired (set) and actual (room) temperature.
E IGNITING THE HEATER
When used for the first time, a new heater may give out a smell for a short while.
You should therefore provide extra ventilation.
Always ignite the heater with the
button L
. Never use matches or a
cigarette lighter.
Just press the button L to ignite the heater. The POWER lamp will start blinking,
indicating that the ignition procedure has started. This will take a short while.
Once the heater is burning, the POWER lamp will remain lit (red). The information
display K will show two numbers. The light next to them indicates that these
numbers refer to the temperatures (Fig. G). The actual room temperature is
indicated below ROOM, while the temperature setting is indicated below SET. The
latter can be changed with the adjustment keys (refer to Section F).
Prior to igniting the heater, always check for sufficient fuel in the removable tank. G: The required tempe-
rature on the left, the
measured temperature
on the right.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro LC-32 Toyotomi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro LC-32 Toyotomi in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 35,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro LC-32 Toyotomi

Zibro LC-32 Toyotomi User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info