460409
61
Zoom out
Zoom in
Previous page
1/89
Next page
REPLACING THE WICK
M ENSURE THAT THE HEATER IS OFF AND COMPLETELY
COOLED BEFORE STARTING TO REPLACE THE WICK.
Release the automatic extinguisher by turning the
safety button counterclockwise.
Remove the three (3) thumbscrews holding heater
cover, and lift cover up. Remove batteries from the
battery holder.
Remove the four (4) wing nuts around the wick
adjuster. Lift the wick adjuster off the heater while
moving it slightly back and forth.
Slide two fingers between the orange band on the wick
and the wick adjuster. After lifting all three (3) pins off
the slots, fold the wick and remove it.
Place the wick adjuster on its side. Next, line up the
three (3) openings in the wick adjuster: 1) the holes in
the sleeve, 2) the diagonal slots in the fixed part of the
wick adjuster, and 3) the slots in the moving part of the
wick adjuster controlled by the wick adjuster knob.
Fold the new wick in quarters and insert it into the wick
adjuster from wick adjuster bottom. Place one of the
pins in one of the line-up openings. If you experience
difficulty, gently turn the wick adjuster knob clockwise.
Then insert the two other pins, turning the wick
adjuster knob if necessary. Ensure that the wick holder
does not bend!
Finally, gently press the wick, all along its
circumference, against the adjuster to insure that it is
firmly in place.
Lower the wick adjuster into the fuel tank, guiding the
tail of the wick so it fits over the primar
y air tube and
evenly into place.
Point the wick adjuster knob to the front of the heater.
Insur
e that the wick adjuster is centered over the studs
on the fuel tank.
NOTE: The space between the wick adjuster and the
primary air tube should be even all around.
8
7
6
5
4
3
2
1
4
60
22aa
44
55
77
11
33
8mm
88bb88aa
66
22bb
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro KRA 106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro KRA 106 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info