460314
8
Zoom out
Zoom in
Previous page
1/14
Next page
E SETTING THE REQUIRED TEMPERATURE
The temperature setting can only be adjusted, when the heater is burning. Use the
adjustment keys ƺ to adjust the temperature. First press either of the two keys to
switch on the function (the °C mark and 4-digit ¹ will start blinking). Next, adjust
the temperature using the key (įmin.) to set the temperature to a higher setting
and the key (Ĭhour) to lower the temperature. Press once to increase the value
one step. After approximately 10 seconds the °C mark and 4-digit will stop
blinking and the setting will be locked (Fig. F).
The available temperature settings range from 6°C minimum to 28°C maximum.
When the heater has been unplugged for more than 10 minutes (or after a power
failure), the temperature will reset to the factory setting of 20°C.
F USING THE TIMER
The timer allows you to switch on the heater automatically at a preset time.
In order to switch on the timer, the correct time must have been set (refer to
Section C) and the heater should be off. Follow the procedure below:
Press the button Ƹ and then the TIMER key ƻ immediately after that.
The TIMER light and the information display ¹ will start blinking.
Use the adjustment keys ƺ to set the time at which the heater must ignite.
Use the key (Ĭhour) to set the hours and the key (įmin.) to set the minutes
(interval of 5 minutes).
After approximately 10 seconds the information display will show CLOCK
again and the TIMER indicator light will light up, indicating that the timer
function has been activated (Fig. H).
The timer will ensure that the room will have been heated to approximately
the required temperature at the set time.
When you want to switch off the heater and ignite it again with the timer, all
you have to do is press the TIMER key (refer to Section G).
Press the button Ƹ once to clear the timer setting.
G SWITCHING OFF THE HEATER
There are two ways to switch off the heater.
Press the button Ƹ. The information display will show the CLOCK
signal. Within approximately one minute the flame will have extinguished.
Press the TIMER key ƻ, when you want to switch off the heater and ignite it
again with the timer the next time. This not only switches off the heater, but
it also activates the timer function. Y
ou can change the required time with the
adjustment keys ƺ (refer to Section F).
1
2
3
4
1
2
4
55
G: The required
temperature on the left,
the measured
temperature on the
right.
H: The TIMER indicator
light indicates that the
timer function has been
switched on.
man_SRE237E_uk.qxd:uk 24-05-11 15:56 Page 57
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro Kamin SRE237E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro Kamin SRE237E in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro Kamin SRE237E

Zibro Kamin SRE237E User Manual - Dutch - 10 pages

Zibro Kamin SRE237E User Manual - Danish - 15 pages

Zibro Kamin SRE237E User Manual - French - 28 pages

Zibro Kamin SRE237E User Manual - Italian - 13 pages

Zibro Kamin SRE237E User Manual - Swedish - 14 pages

Zibro Kamin SRE237E User Manual - All languages - 127 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info