460316
8
Zoom out
Zoom in
Previous page
1/16
Next page
4
67
G: The TIMER indicator
light indicates that the
timer function has been
switched on.
E ELECTRIC HEATING MODE
Press the electric heating button when the kerosene heating is off. The electric
heating mode operates by itself. The information display will display the operating
time of the electric heating.
Use the adjustment keys O to select the operating time (1 = 1 hour, 2 = 2 hours,
4 = 4 hours or -- = continuous). Set the operation time and after a while the
information display will be switched to 800. The electric heating is now operating
in a high mode (800W). Press the adjustments keys O to select the high mode
(800W) or low mode (400W). Press the electric heating button M again, to stop
the electric heating. The electric heating lamp will go out and the clock indication
will be displayed in the display. Due to safety reasons the electric heating will stop
after 8 hours (even in continuous operation).
Switch off the electric heating mode by using the timer function or by pressing the
electric heating button M.
F SETTING THE REQUIRED TEMPERATURE
The temperature setting can only be adjusted, when the heater is burning. Use
the adjustment keys O to adjust the temperature. First press either of the two
keys to switch on the function (the °C mark K will start blinking). Next, adjust the
temperature using the key on the right (Mmin.) to set the temperature to a higher
setting and the key on the left (Nhour) to lower the temperature. Press once to
increase the value one step. After approximately 10 seconds the °C mark will stop
blinking and the setting will be locked (Fig. F).
The available temperature settings range from 6°C minimum to 28°C maximum.
When the heater has been unplugged (or after a power failure), the temperature
will reset to the factory setting of 20°C.
G USING THE TIMER
The timer allows you to switch on the heater automatically at a preset time.
In order to switch on the timer, the correct time must have been set (refer to
Section C) and the heater should be off. Follow the procedure below:
1
Press the
button L and then the TIMER key P immediately after that.
The TIMER lamp and the 4-digit K will start blinking.
2
Use the adjustment keys O to set the time at which the heater must ignite.
Use the key on the left (Nhour) to set the hours and the key on the right
(Mmin.) to set the minutes (interval of 5 minutes).
3
After approximately 10 seconds the 4-digit will show CLOCK again and the
TIMER lamp will light up, indicating that the timer function has been
activated (Fig. G).
4
The timer will ensure that the room will have been heated to approximately
the required temperature at the set time.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro Kamin HYBRID E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro Kamin HYBRID E in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro Kamin HYBRID E

Zibro Kamin HYBRID E User Manual - English, German - 32 pages

Zibro Kamin HYBRID E User Manual - German - 16 pages

Zibro Kamin HYBRID E User Manual - Dutch - 16 pages

Zibro Kamin HYBRID E User Manual - Danish - 16 pages

Zibro Kamin HYBRID E User Manual - Français - 17 pages

Zibro Kamin HYBRID E User Manual - Italian - 16 pages

Zibro Kamin HYBRID E User Manual - Polish - 16 pages

Zibro Kamin HYBRID E User Manual - Swedish - 16 pages

Zibro Kamin HYBRID E User Manual - Spanish - 16 pages

Zibro Kamin HYBRID E User Manual - Norwegian - 16 pages

Zibro Kamin HYBRID E User Manual - Finnish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info