460406
95
Zoom out
Zoom in
Previous page
1/198
Next page
95
4
In the starting up phase, when the re is not (yet)burning, thepower output
(burning level) can be changed as follows: press P1 and at the same time press P5
orP6torespectivelydecreaseorincreasethepowerlevel.
When the room temperature has reached the required temperature the heater will
automaticallyswitchtothelowestheatingpowerlevel.DisplayAwillshow“on
1”.DisplayBwillnowshow“rIS”,whichmeansthattheroomtemperatureisat
the required level and the stove has switched to the lowest possible heating power
output level. WhentherequiredroomtemperatureisreachedthestovewillNOT
switchoff.Itwillautomaticallyswitchtothelowestpossibleheatingpoweroutput
level.Thismeansthatthestovewillkeeponheatingtheroom,butatlowestpossible
capacity.
D.6 ROOM AIR CIRCULATION
Thisstoveisprovidedwitharoomaircirculationfan.Whenthefanisswitchedon
the room air is drawn across the internal hot surfaces of the stove and due to this
warmed up.
D.7 FLAME ADJUSTMENT
Afterstart-uptheamecanbeadjustedbyputtingthePVCbutterylid(40mmin
diameter) on the combustion air inlet positioned at the backside of the stove. See
picture 5 and picture 6.
Ifthewoodpelletsburninginsidetheburningpottendtofall/yout,itmeans
thereistoomuchcombustionairentering.Rotatingthebutterylidwillincrease
ordecreasethecombustionairinletopening.Thesmallertheinletopeningthe
lowerthechancethatwoodpelletswillfall/yout.
G
Theinuencethebutteryvalvehasonthedraughtisdependingonthe
congurationofthetotalsystemofchimney,stoveandcombustionair
inlet.Insomeoccasionstheclosingofthebutterywillhardlyhaveany
effect in other occasions the effect is significant.
D.8 ELECTRICAL POWER FAILURE
Picture 7: display indication after electrical power interuption.
Afteranelectricalpowerfailureoranelectricalpowercutoutthestovewilldisplay
“A1ArnorEtE”.Thesmokeextractorfanwilldischargethefumesresidualfor20
minutes after return of the electrical power. After which the stove will go into the
switching off phase phase.
Press button P4 for more than 1 second will overrule the switching off procedure
and will continue the heating mode.
Picture 5: the butterfly
valve. Note the butter fly
valve is delivered loose.
Picture 6 stove view from
back side. The butterfly
valve mounted on the
combustion air inlet.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zibro Aida at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zibro Aida in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zibro Aida

Zibro Aida User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info