624658
85
Zoom out
Zoom in
Previous page
1/128
Next page
General Maintenance
5.13
Wheels And Tires
Inspect both wheels for the following:
Bent, loose, or missing spokes (DS only)
Bent or cracked rims
Impact marks on the rims
Inspect both tires for the following:
Cuts, cracks, splits, or missing tread lugs
in the tread or
sidewall area
Bumps or bulges within the tire body
Uneven tire tread wear. Wear on one side of the tire
tre
ad or flat spots in the tire tread indicate a problem
with the tire or motorcycle.
Exposed tire thread or cords
If ei
ther of the wheels or tires are
found to have any of the
above conditions, replace the wheel and tire immediately.
Tire Inflation
CAUTION: Under-inflation is a common cause of tire
failure and may result in severe tire cracking, tread
separation, “blowout,” or unexpected loss of motorcycle
control, causing serious injury or death.
Tire pressure should be checked and adjusted to the
proper inflation levels before each ride. Tire pressure
should be checked using an accurate gauge when the tires
are cold. This means that the tires have not been ridden on
for at least 3 hours. Always replace the valve stem cap
when finished adjusting tire pressures.
MODEL FRONT REAR
S & SR 207 kPa (30 PSI) 207 kPa (30 PSI)
DS 200 kPa (29 PSI) 186 kPa (27 PSI)
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zero S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zero S in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info