624658
67
Zoom out
Zoom in
Previous page
1/128
Next page
General Operation
4.17
Rear Shock Adjustment
Spring Adjustment
Obtaining the correct rear spring preload is critical for
proper handling. The spring preload must be set to match
the weight of the rider. The spring is preloaded for an
180 lb (82 kg) rider. This puts the rear tire 1/3 of the way
through it
s vertical travel. Heavier riders require stiffer
spring rates. A good approximation of your rear spring
requirements can be found by measuring the rear
suspension’s sag. This measurement quickly determines if
your rear spring is approximately correct for your weight.
This adjustment is a recommended guideline; personal
riding preference may vary from the specifications given.
To Check the Sag value:
1. Support your motorcycle on a
stand with the rear wheel
off the ground.
2. Measure vertically from the rear axle to
the rear fender.
Mark this spot as it is used for other measurements.
3. Record this measurement (this is the measurement
referred to as M1).
4. Remove the motorcycle from the stand.
5. Wearing your normal riding apparel, sit on the
motorcycle.
6. Have an assistant hold the motorcycle up, your feet
should
be on both pegs.
7. Bounce the suspension a couple of times.
8. Have a second assistant take a measurement using the
sa
me
locations as in step 2.
9. Record this measurement (this is the measurement
refe
rred to as M2).
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zero S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zero S in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info