624658
51
Zoom out
Zoom in
Previous page
1/128
Next page
Starting and Operating
4.1
Starting and Opera tingStarting and Opera ting
First Time Set-Up
If your motorcycle was direct-shipped you will need to
perform the following:
1. Remove the motorcycle from its shipping crate. See
Unp
acking Your Zero motorcycle on page
4.2.
2. Your Zero motorcycle is shipped fully charged from the
factory. If necessary, see
Power Pack”, on page 4.5.
3. Identify and inspect wheels for spoke tension and/or
damage (DS only).
4. Check the tire pressure and adjust to proper
specifica
tions. See
Tire Inflation”, on page 5.13.
5. Inspect the hydraulic brake system. Follow the
hydrau
lic line from the reservoirs to the calipers and
verify that there are no leaks or damage to the brake
lines. Verify that the brakes function properly.
6. Make sure the motorcycle key switch is OFF
, then twist
the throttle to make sure its rotation is smooth, and it
returns correctly.
7. Inspect bolts and make sure they are tight. See
page
5.9 for general maintenance information. Double
check the fork, wheel, and brake bolts.
8. Insert the key in the key swi
tch and turn the key to the
ON position. The gauge performs a self test sweep.
The charge indicator should read fully charged.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zero S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zero S in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info