657581
7
Zoom out
Zoom in
Previous page
1/145
Next page
1
1312
EN EN
4  VACSY® SEALING UNIT
Figure 1
Position
1
On/Off Button
To switch on/switch off the Vacsy sealing unit.
2
On/Off Indicator
When the machine is connected to electrical power, the indicator light is green.
3
Seal Button
Starts the sealing process (without vacuum packing). You can use this to seal the open end of a roll.
4
Vacuum Packing of Bags / Start / Stop Button
Start of vacuum packing and sealing process. The bag will first be vacuum packed and then automatically sealed. Also for vacuum packing
of softer and moister foods. Press this button again at any time during the vacuum packing process to activate the sealing process manually.
5
Vacuum Packing of Container Button
Vacuum packing of containers with Accessory Port and Hose. Vacuum packing process automatically stops when the correct vacuum
is reached.
6
Overheating
Automatic overheating protection. The indicator lights up if the time interval between individual processes of vacuum packing is not
long enough (at least 20” between individual cycles or after sustained use). Wait 45 minutes until the indicator goes off and carry on
using the machine as normal.
7
Vacuum & Seal Indicator
While the machine is vacuuming, the indicator light is on. During the sealing process, the indicator blinks.
8
Liquid Block
The indicator is lights up the machine has sucked liquid out of the vacuum bag during vacuum packing.
9
Sealing Strip
The Sealing Strip is covered with a Teflon foil that should in no case be removed.
10 Vacuum Channel Gasket/Foam Seal
11
Vacuum Channel with Tray
During vacuum packing, the edge of the bag must be set between the gaskets in the middle of the Vacuum Channel (Figure 6). In case of
improper vacuum packing, any excess liquid is stopped here and the “Liquid” indicator lights up. You can read more about this in our
Tips on page 19.
12
Accessory Port used for vacuum packing with containers
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zepter VacSy Sealing Unit VS-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zepter VacSy Sealing Unit VS-S in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 10,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info