Manual Zepter PWC-200 - Tuttoluxo 2S (page 10 of 22) (English)

657583

Zoom out

Zoom in

1/22

6.1 HOSE AND ACCESSORIES FITTING

Insert the hose with its connection into the SLALOM SYSTEM

at the front. (See

Chapter 4.1: Patented Features, Slalom System

In order to clean floors, it will be necessary to insert the proper accessories into

the special extension tube (Pict.1) by using the proper fit/release button (Pict. 2)

and then connect to the grip handle by simply pressing.

When the hose is inserted, all 3 orange lights will start blinking. The machine is

now on "STAND BY", ready for use.

The tank lid fasteners have been designed in such a way that, should they be

hit when they are open, they will not be damaged. They might break loose, but

it is very easy to put them back into place, by fitting the forks onto the support

pins (Pict. 3).

For your convenience you will find 2 TUBE-CARRIERS on each side of the device

in which you can insert the extension tubes whenever you need your hands free

for something else (move furniture around, etc.), (Pict. 4).

MAX speed

MED speed

MIN speed

Function

button

Cable winder

button

6.2 PREPARING THE VACUUM FUNCTION

Connect the power cord (Pict.5) by pulling it out from the back of the machine

and inserting it into a mains plug. In order to avoid the power cord getting hot

inside the machine, always pull it out to its complete extension. To rewind, push

the cable winder button (Pict.6) on the upper right side of the machine; do not

let the plug whip around while rewinding.

Upon plugging into the mains, 3 flashing LEDS on the function button (Pict.7)

will come on to signal that the machine is now connected and on standby. Press

the function button again and quickly release, the three flashing LEDS now go

off, and one steady orange LED will come on: the machine is now running on

minimum speed and you can start vacuuming.

If you want to change vacuum power, keep the function button pressed for a

few seconds: 2 steady LEDS will come on, to indicate MEDIUM vacuum power;

or if you keep the function button pressed, the speed will change to MAX and so

on until the button is released at the desired speed.

Reminder! To turn the machine off, give a short push on the same button!

To switch off the motor, press and then quickly release the function button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zepter PWC-200 - Tuttoluxo 2S in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zepter PWC-200 - Tuttoluxo 2S Manual

Product: