623342

Zennio Z41 Pro Touch Panel Manual

73
Zoom out
Zoom in
Previous page
1/96
Next page
Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
73
box will not lose the configuration previously set by the user.
Finally, this function offers the following parameters in ETS:
Timer Type: switches between “1-bit value” (default option) and “Scene”.
Scene Number: shown only after selecting “Scene” for the above
parameter. This field defines the number of the scene (1-64) that will be
sent to the bus on the execution of the timed sending.
Note: the execution of user-defined timers is triggered on the detection of
state transitions, even if the clock does not specifically pass through the
specified time. In other words, supposing one timed sending of the value “ON”
at 10:00h am and one timed sending of the value “OFF” at 8:00h pm, if the
internal clock is set to 9:00h pm just after 10:00h am (and therefore after
having sent the value “ON”), then the “OFF” order corresponding to 8:00h pm
will take place immediately after the time change.
f) Chrono-thermostat:
Boxes configured as chrono-thermostats let the final user schedule the timed
sending of temperature setpoint orders (preceded by switch-on orders) or
switch- off orders to a thermostat through the KNX bus.
To that end, it is necessary to configure the following two parameters:
Figure 80 Chrono-thermostat
Minimum Setpoint Value: minimum setpoint value the user will be able
to set. Range: [-20, 95] x 1ºC. Default value: 18ºC.
Maximum Setpoint Value: maximum setpoint value the user will be able
to set. Range: [-20, 95] x 1ºC. Default value: 30ºC.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Pro Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Pro Touch Panel in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info