623342

Zennio Z41 Pro Touch Panel Manual

68
Zoom out
Zoom in
Previous page
1/96
Next page
Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
68
have been enabled from the Energy Monitor Objects screen (see section
3.2.6) under the Main configuration tab. This way, the box will be
monitoring the values received through the [Energy x] Power, [Energy x]
Energy, [Energy x] CO2 and [Energy x] Cost objects, where “x” is the
number of the assigned channel.
Important: although it is possible to assign the “Energy monitor (KES)”
function to any box from any page, it is only possible to control as many as
six different energy channels, as it is not possible to have an exclusive
channel for each of the boxes.
Energy Consumption: determines whether the pop-up window should
show the instant value of the [Energy x] Energy object or not.
CO2: determines whether the pop-up window should show the instant value
of the [Energy x] CO2 object or not.
Cost: determines whether the pop-up window should show the instant
value of the [Energy x] Cost object or not.
When this function is assigned to the box, two 1-bit communication objects
show up: [Pn][Bi] Energy Monitor: Request and [Pn][Bi] Energy Monitor:
Reset. The first of them is intended for sending a request from Z41 Pro to KES
asking for the updated values of the energy measurement, which requires
having the object properly linked to the request object from KES, while the
second object will permit sending reset orders from Z41 Pro to KES, so that all
the energy consumption, CO
2
and cost variables are set to zero, which requires
having the object properly linked to the reset object from KES. Please refer to
the user manual of KES for further information.
Note: the energy monitor objects in Z41 Pro have no restrictions about the
meaning of the data they receive from the bus, so it is entirely at the integrator’s
choice whether the box will monitor estimations, average consumptions, real
consumptions, etc.
Finally, in the pop-up window that shows up when the box is pressed, the
following elements are present:
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Pro Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Pro Touch Panel in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info