623342
60
Zoom out
Zoom in
Previous page
1/96
Next page
Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
60
certain value (see Table 5), after which the box will display the icon that
corresponds to the new mode. Additionally, if the status object receives
from the bus a value that represents any of the modes, the box will adopt
the corresponding icon, while if an unrecognised value is received, no icon
will be shown.
Mode Value sent
Heat 1 (0x01)
Cool 3 (0x03)
Auto 0 (0x00)
Fan 9 (0x09)
Dry 14 (0x0E)
Table 5 HVAC Mode vs. Object Value
Finally, the Left Button and Right Button parameters permit selecting the
icon that will be displayed inside the buttons of the box.
Note: a list with all icons available in Z41 Pro can be found in document “Z41
Pro Icon list”, available at www.zennio.com.
c) Fan Control
This function implements a 2-button (increase / decrease) fan control, as well
as an icon indicator.
Figure 61 Fan Control
When this function is assigned to the box, a binary control object ([Pn][Bi] Fan
Control) and a 1-byte status object ([Pn][Bi] Fan Indicator) are enabled. The
former will be sending the value “1” to the bus when the user touches the
increase button, while the value “0” will be sent when the decrease button is
touched. On the other hand, the status object (which needs to be linked to the
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Pro Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Pro Touch Panel in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info