623342

Zennio Z41 Pro Touch Panel Manual

40
Zoom out
Zoom in
Previous page
1/96
Next page
Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
40
The remaining functions under Indicator are shown in Table 1. In all of these
cases, the box will behave as a numerical state indicator that permanently
displays the value of a certain communication object, which is enabled when
the function is assigned to the box.
Function Range Related object
1-byte (unsigned int.) 0– 255 [Pn][Bi] 1-byte unsigned int indicator
1-byte (signed int.) -128 – 127 [Pn][Bi] 1-byte signed int indicator
Percentage indicator 0% – 100% [Pn][Bi] Percentage indicator
2-byte (unsigned int.) 0 – 65535 [Pn][Bi] 2-byte unsigned int indicator
2-byte (signed int.) -32768 – 32767 [Pn][Bi] 2-byte signed int indicator
2-byte (floating point) -671088.64 – 670760.96 [Pn][Bi] 2-byte float indicator
Table 1 Numerical indicators
The table contains the allowed value ranges and the name of the object for
each case.
In the particular case of the 2-byte floating point indicator, the integrator will be
shown a text field (Float Unit), empty by default, that permits specifying the
measuring units (up to 6 characters) of the displayed value, for instance “ºC”.
Moreover, for this particular case, the device will dynamically adjust the number
of the decimal figures shown depending on the order of magnitude of the
current value: two for values greater than 0 and lower than 0.1; one for values
between 0.1 and 100; and none for other cases (and analogously for negative
values).
All these numerical indicators incorporate an additional parameter, Save Log?.
In case of enabling this option (“Yes”), any changes in the value of the indicator
will be continuously saved to an internal log file, so the final user can be
afterwards offered a visual representation that reflects the chronological
evolution of such value. Boxes for which this option has been enabled will show
a small icon overlaid on their upper left corner.
Figure 36 Indicator implementing the Log Function
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Pro Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Pro Touch Panel in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info