623342

Zennio Z41 Pro Touch Panel Manual

18
Zoom out
Zoom in
Previous page
1/96
Next page
Z41 Pro
http://www.zennio.com Tecnical Support: http://support.zennio.com
18
3 ETS PARAMETERISATION
To begin with the parameterisation of Z41 Pro, once the ETS program is running it is
necessary to import the product database (Z41 Pro application program). Next, the
device is added to the project and, after right-clicking on the name of the device, the
option “Edit parameters” must be selected to start the configuration process.
The next sections explain the ETS parameterisation of the device in depth.
Note: the amount of characters permitted for text parameters (labels, etc.) by ETS may
differ depending on whether they contain special characters (symbols, accents…)
coded with more than one byte. It is advisable to verify that these texts fit properly on
the screen, with independence of whether they reach the maximum text length allowed
by ETS or not.
Important: whenever the device is updated to a new version of the application program
from ETS, it is also necessary to update the firmware of the secondary microcontroller
(responsible for the operating system; see section 1.3.1) in case an updated version
exists. If the installed versions of the application program and the firmware do not
match, the device may not work correctly (the Software box in the Status page will
show the word “Error”).
3.1 DEFAULT CONFIGURATION
This section illustrates the default initial state of the device.
Figure 12 Default Topology
The general objects enabled by default are:
[General] Time: 3-byte object for setting the internal time of the device, for
example, by linking it to a KNX clock. This object also allows read requests,
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Pro Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Pro Touch Panel in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info