623343

Zennio Z41 Lite Touch Panel Manual

73
Zoom out
Zoom in
Previous page
1/86
Next page
Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
73
Trigger, should be interpreted by Z41 Lite as an alarm situation. Implicitly,
this parameter also defines the inverse “no alarm” value.
Periodic Monitoring: activates (“Yes”) or deactivates (“No”, default
option) periodic monitoring of the alarm trigger object.
Cycle Time (x 1min.): in case of having selected “Yes” under the above
parameter, sets the maximum accepted time space without receiving the
“no alarm” value before Z41 Lite adopts the alarm situation.
Example I: supposing a certain sensor responsible for sending the value “1”
(once) to the bus when a flood is detected, and the value “0” (again, only
once) when such situation terminates, if the object sent is linked to the alarm
trigger object from an alarm box in Z41 Lite where no periodical monitoring
has been parameterised and where the value “1” has been set as the alarm
value, then Z41 Lite will notify an emergency every time a flood takes place.
The notification will stop as soon as the user touches any button, although a
warning icon will still blink on the screen. After that, if the user acknowledges
the alarm, the icon will stop blinking; switching then off once the sensor sends
a “0”.
Example II: suppose a certain CO
2
sensor responsible for sending the value
“0” to the bus every two minutes, except when it detects a dangerous CO
2
level; in such case, it will immediately send the value “1”. If the object being
sent is linked to the alarm trigger object from an alarm box in Z41 Lite where
periodic monitoring has been parameterised and where the value “1” is
configured as the alarm trigger value, then Z41 Lite will notify the user about
the emergency both if the CO
2
level reaches a dangerous level and if the
sensor stops sending the value “0”, for example due to failures or sabotage.
The user should proceed in the same manner as in the above example to
manage the alarm notification.
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Lite Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Lite Touch Panel in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info