623343

Zennio Z41 Lite Touch Panel Manual

21
Zoom out
Zoom in
Previous page
1/86
Next page
Z41 Lite
http://www.zennio.com Tecnical Support: http://zennioenglish.zendesk.com
21
Note: the default option is encouraged. Permanent illumination may affect
adversely the device lifetime, and is only intended for special circumstances.
Show Time: sets whether the current time (according to the internal clock)
should show in the upper left corner of every page. The default is “Yes”.
Show Temperature: sets whether the current temperature should show or
not in the upper right corner of every page, being necessary in such case to
choose the source of the temperature value: “Internal temperature probe” or
“External value”. If the latter is chosen, an object named [General] External
temperature will be enabled, so that it can be grouped with any other object
that sends temperature values.
Time/Date Sending Period: when enabled (value different from zero),
whenever the device is restarted, the date and time objects (“[General] Date
and “[General] Time”) will be sent to the bus, and thereafter, they will be sent
again every time the period expires. Setting a new time to the device either
through object or from the date/time configuration window will not restart the
count of the sending period. Range: [0-65535] x 1 min. The default value is
10 min.
Thermostat 1: checkbox (unselected by default) that activates/deactivates
the Thermostat 1 parameter screen. See section 3.7.
Thermostat 2: idem for Thermostat 2. See section 3.7.
Weekdays Initials (Mon... Sun): field that permits customising the label that
represents each of the weekdays within the configuration pages of the weekly
timers (see epigraph e) in section 3.4.2.5). A 7-character string (including
letters or numbers) should be entered, so each of the characters will
represent one weekday. The default value is “MTWTFSS”, according to the
initial letters of the day names in English.
Label for “Time ON”: field that permits customising the label that will be
shown within the configuration pages of the weekly timers (see epigraph e) in
section 3.4.2.5), next to the checkbox that enables/disables the sending of
the switch-on order. The default value is “Time ON”.
Label for “Time OFF”: field that permits customising the label that will be
shown within the configuration pages of the weekly timers (see epigraph e) in
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio Z41 Lite Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio Z41 Lite Touch Panel in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info