623349

Zennio InZennio Z38i Touch Panel Manual

45
Zoom out
Zoom in
Previous page
1/50
Next page
ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com
45
45
Sending of "1" Delay: specify the time, in seconds, after which the value "1" will be sent,
once received the corresponding order.
Periodical sending of "0": define a cyclical sending, in seconds, of the value "0". The
value 0 indicates that the periodical sending is not activated.
Periodical sending of "1": define a cyclical sending, in seconds, of the value "1". The
value 0 indicates that the periodical sending is not activated.
Block: if "Yes" is chosen, a new 1-bit communication object "[Ix] Block" is enabled, to
block or unblock the corresponding input (sending a "1" or a "0", respectively). During the time
the input is blocked, any order received from the KNX bus will be ignored.
Sending statuses on bus voltage recovery: this option allows configuring an automatic
sending of the input status after a voltage recovery, with a sending delay (value between 0
and 255, in seconds).
3.5. THERMOSTATS
InZennio Z38i application offers the possibility to enable and configure up to 2 thermsotats,
independently.
Figure 3.18. Thermostat 1 Configuration
To obtain theoretical information about the Zennio thermostat functioning, as well as information
about its ETS configuration, please consult the specific documentation "Thermostat Zennio"
available at http://www.zennio.com.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio InZennio Z38i Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio InZennio Z38i Touch Panel in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio InZennio Z38i Touch Panel

Zennio InZennio Z38i Touch Panel User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info