623349
42
Zoom out
Zoom in
Previous page
1/50
Next page
ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com
42
42
a) Short press
No action: Z38i does not carry out any action when short pressing over the push button
connected to its input.
Sending of 0/1: this function results on sending to the KNX bus a binary value, which will
change depending on the chosen option:
Response 0: sends the value "0" through the object "[Ix][Short Press] 0"
Response 1: sends the value "1" through the object "[Ix][Short Press] 1"
Response Switching 0/1: sends the values "0" and "1" alternately with every short
press through the object "[Ix][Short Press] Switching".
Shutter control: This function results on sending 1 bit to the bus, in order to control the
shutters. The available options are:
Up: Rise the shutter. The value "0” is sent trough the object “[Ix][Short Press] Move
Up Shutter”.
Down: Lower the shutter. The value "1” is sent trough the object “[Ix][Short Press]
Move Down Shutter”.
Up/Down (switched): Alternative switching between the Move Up/Down orders (to
manage the shutter with an only input), through the object "[Ix][Short Press] Move
Up/Down Shutter".
Stop/Step up: Stops the shutter; When talking about shutters with lamellas, this
mode allows the user to control them; this parameter moves lamellas a pull up step. The
value "0” is sent trough the object “[Ix][Short Press] Stop/Step Down Shutter”.
Stop/Step down: Stops the shutter. When talking about shutters with lamellas, this
mode allows the user to control them; this parameter moves lamellas a pull down step.
The value "1” is sent trough the object “[Ix][Short Press] Stop/Step Down Shutter”.
Stop/Switched Step: Stops the shutter. When talking about shutters with lamellas,
this mode allows the user to control them; this parameter alternatively switches the
lamellas pull up and down steps, by sending the values "0" and "1" alternately through the
object "[Ix][Short Press] Stop/Step Shutter (switched)".
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio InZennio Z38i Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio InZennio Z38i Touch Panel in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio InZennio Z38i Touch Panel

Zennio InZennio Z38i Touch Panel User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info