623349

Zennio InZennio Z38i Touch Panel Manual

6
Zoom out
Zoom in
Previous page
1/50
Next page
ZENNiO AVANCE Y TECNOLOGÍA vwww.zennio.com
6
6
Note: This device does not need any additional external power supply since it is powered through
the KNX bus.
In the factory status of the panel, after connecting it to the KNX bus and before carrying out any
programming, the calibration screen will be shown. Once calibrated (see steps-to-follow to do so in
figure 1.3), it will appear in the header the text "Z38i 2.2", where the version of the pre-installed
application is shown; in this case, the version 2.2. When pressing the MENU button, it will be
possible to access the Configuration page, where the boxes 1, 4 and 5 have been enabled. By a
short-pressing over the right button of the box 1 (PROG. LED), the panel can be set the into the
programming mode, without having to physically press the programming button (2).
Once installed the panel, it will be possible to download the desired programming.
After any download from ETS, it must be calibrated. This calibration is carried out by pressing the
upper left corner and bottom right corner of the Display, in this order (see Figure 1.3). This
calibration will be kept although a power failure in the KNX bus occurs. However, every time Z38i is
reprogrammed, the panel must be recalibrated.
Figure 1.3. Z38i calibration
To obtain more detailed information about the technical features of InZennio Z38i, as well as
security and installation information, please read the controller Datasheet, included in the original
package of the device and also available at: http://www.zennio.com.
It is highly recommended to consult the document “In factory application program”, included in
the original package of the panel.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio InZennio Z38i Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio InZennio Z38i Touch Panel in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio InZennio Z38i Touch Panel

Zennio InZennio Z38i Touch Panel User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info