623350

Zennio InZennio Z38 Touch Panel Manual

35
Zoom out
Zoom in
Previous page
1/55
Next page
ZENNiOAVANCEYTECNOLOGÍA www.zennio.com
35
Note: When an error or accident is detected on the KNX installation, InZennio
Z38 will show the “Technical Alarms Screen”, and a danger icon will appear in
the box affected; at the same time, the Panel blinks and emits a “beep” to warn
the user.
Once the warning reception is confirmed by the user (pressing the OK button),
the screen will recover its normal state:
After 90 seconds, Inzennio Z38 display will again show the “Home” default
screen.
It is Really Important to know that confirming a warning doesn’t make the
Danger icon disappear from the box affected; this icon will only disappear from
the screen when the detector device sends again to the BUS its “normal status”;
if cyclical monitoring is enabled, it will be the own device which sends this
status when danger disappears.
2.2.4. CONFIGURATION
This is a specific page where to adjust some basic parameters.
Every “enabled” Box in the display has a field “Name”:
NAME Æ This field allows a user to associate a name with the
corresponding box in the display, (11 free characters are available to set
the name).
BOX 1 (Programming Mode)
When programming a device physical address, users can set the
“Programming Mode” directly from this box. This characteristic
makes this process easier as the user won’t need to access the rear
side of the panel to push the “Programming Button” any more
BOX 2 (Time Setting)
To set the time on the display:
¾ Time (together with the room temperature) is always displayed
in the middle upper section of the display.
¾ When setting the time, the display will send the new settings to
the BUS through its own Communication Objects.
¾ The refresh rate is 1 minute.
¾ When the display recovers from a BUS Power failure, this will
show the time it had just before the incident.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio InZennio Z38 Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio InZennio Z38 Touch Panel in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio InZennio Z38 Touch Panel

Zennio InZennio Z38 Touch Panel User Manual - German - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info