623350

Zennio InZennio Z38 Touch Panel Manual

30
Zoom out
Zoom in
Previous page
1/55
Next page
ZENNiOAVANCEYTECNOLOGÍA www.zennio.com
30
¾ Protection Temperature: This parameter fixes the maximum
temperature the user will accept.
9 Protection Temperature is measured in ºCelsius.
9 There is no connection between the “Set Temperature”
and the “Protection Temperature”.
9 This is the real temperature to be applied as
overheating protection.
9 Thermostat will turn Off when temperature in the room
reaches “Protection Temperature – 1ºC”
A small introduction to the Temperature Control methods used by the Z38 is
detailed below.
HYSTERESIS Æ This is one of the control methods the thermostat may use to control a room
temperature. Hysteresis can be used to filter signals so that the output reacts slowly by taking
recent history into account. The only factor to consider when applying this method is the
sensivity range; in this case, by setting this parameter we’ll be setting both the upper and lower
level of the sensivity range (hysteresis).
Next an example: a thermostat controlling a heater may turn the heater on when the temperature
drops below A degrees, but not turn it off until the temperature rises above B degrees. Thus the
On /Off output of the thermostat to the heater when the temperature is between A and B
depends on the history of the temperature. This prevents rapid switching On and Off as the
temperature drifts around a set point.
Consider that, if the GAP (interval between the upper and lower hysteresis points) is too narrow,
devices in charge to transmit and receive the On/Off to the system might be damaged because of
a rapid switching.
The default configuration sets a 2ºC GAP referred to the “Set Temperature”
Note:
The control method the Thermostat uses when this reacts autonomously to the “Freezing
or Overheating Protection” is “2 Points with Hysteresis”.
In this case the lower hysteresis point is 0ºC (referred to the parameterized Temperature) while
the upper point is 1ºC. This means that the system will start working exactly when the
“Protection Temperature” is detected and won’t stop until the room temperature raises one
degree exactly.
LOWERHYSTERESIS
Time
UPPERHYSTERESIS
Tª
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zennio InZennio Z38 Touch Panel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zennio InZennio Z38 Touch Panel in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zennio InZennio Z38 Touch Panel

Zennio InZennio Z38 Touch Panel User Manual - German - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info