Manual Zenec ZE-RVTX - A-V Transmitter System (page 5 of 12) (English, German)

729885

Zoom out

Zoom in

1/12

DEVICE OPERATION:

The Receiver module (RX) and the Transmitter module (TX) out of the same box have been paired

before packing.

If you need to pair the modules again, long press the pairing buttons of RX- and TX-module at the

same time for over 2 seconds, the LED status lights will be flashing slowly. When pairing succeeds,

the LED´s will stop flashing.

If the LED status lights are flashing fast, both modules are in transmission mode. This means the

RX- and TX-module are paired correctly and video and audio signal is transmitted.

If no signal is transferred, the ZE-RVTX will change automatically to a standby mode. The LED

status lights stays permanently on. The LED indicator light is also permanently on if the:

• RX- and TX-module is not paired correctly.

• RX- or TX-module is powered off.

• TX-module didn´t detect a video or audio signal.

CAUTION

• Make sure that there are no bigger electrical components in the immediate vicinity of the

TX- and RX-module, so that the power level of the signal transmission is not impaired.

• The modules are only conditionally dustproof and have been licensed according to the

international standard IP53. Due to this, both modules should only be installed inside the

vehicle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zenec ZE-RVTX - A-V Transmitter System in the language / languages: English, German as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zenec ZE-RVTX - A-V Transmitter System Manual

Product: